Features:
Adjustable Mounting Hardware

Weather Proof Enclosure

Connects to any Ethernet device

11mbps Transfer Rate

Integrated PoE Adapter

Technical Specs.

This outdoor Access Point does not come with an Integrated Antenna.  Please select one of our High Gain 2.4GHz Antennas to connect to this Outdoor 11mbps Access Point.  This airBridge unit is designed the same as the AirPoint Pro Total without the internal 13dbi antenna.

This SmartBridge access point can be mounted outdoors, and can be powered through the integrated Power-over-Ethernet adapter that comes with the unit.  This means that this

access point can be placed up to 300ft. away from your network, with only a single cat5 cable connecting to it.

AirBridge™ is the preferred CPE solution which makes this possible, providing excellent performance and enhanced security for users. AirBridge now comes with new enhancements like Surge Protection Circuit and an external N Connector.  Mount the CPE device outdoors,

and run an Ethernet cable down to your wired/wireless network device.
           

AirBridge™ is a 2.4 GHz 802.11b compatible client device that is based on the coveted AirBridge™ core design. The AirBridge™ is  encapsulated into a single neat NEMA 4X device. 

To enhance deployment flexibility, an external N connector has been added. If during installation it is discovered that a higher gain external antenna is required, this can be 

connected to the external N connector.  
                   

The Surge Protection circuit in the AirBridge brings carrier-class protection for long lasting performance. Designed with ease of installation in mind, AirBridge™ simplifies subscriber installation with its Integrated Power over Ethernet (PoE), 'Plug and Play' installation, extended temperature range and a software controlled 'dial a power' capability. It supports 

roaming, firmware upgrade across subnets and PPPoE.

The AirBridge client device will work well in many client applications like:

Features at a glance

• Multi-Mac support to connect LAN to the wireless network.
• Rugged weatherproof design in a compact and stylish enclosure.
• Ideal for wireless LAN access in all indoor and outdoor areas.
• Flexible mounting on wall or antenna mast (up to 2 inch diameter).
• Can be mounted for Horizontal or Vertical Polarities.
• High receiver sensitivity; provides error free data transfer.
• Auto Fall back data rate for long distance communication in noisy environments.
• Powered through Ethernet cable using powerShot™ PoE injector.
• Driver-less operation with true 'Plug and Play' (in single MAC mode).
• Works with all Operating Systems.
• High level security with full 128 bit Key WEP encryption.
• Compatible with IEEE 802.11b & IEEE 802.3 standards.
• Firmware is upgradeable to protect your investment.

Features:

Multiple Antennae Compatibility - The airBridge™ Outdoor has been FCC certified with many antenna configurations normally used by WISPs and wireless installers. This provides a much needed flexibility to choose the right antenna with the pattern and gain characteristics to conform to local regulatory limits. This makes it investment friendly, since it gives choice of antenna equipment across multiple vendors

Superior Operating Range - airBridge™ outdoor features LongRange™ 802.11b radio that provides enhanced power to deliver high data throughput and long operating range. SmartBridges' superior design of the radio receiver allows it to listen to the smallest incoming signals. These superior receiver and transmitter characteristics result in long-range wireless coverage. With a suitable external antenna, the range extends over 34 kilometers (21 miles)

in free open space.

Proven Performance in Harsh Environments - Housed in a NEMA 4X weatherproof casing, the airBridge™ Outdoor is built to operate in harsh environments. This device can be installed on the building exterior as well as indoors. AirBridge™ Outdoor delivers reliable performance under all climatic conditions, withstanding temperatures between -40 C to +65 C (-40 F to 150 F). It is the perfect solution for wireless applications in dusty, wet, oily environments like a factory or a chemical plant.

Easy Installation - The self-contained airBridge™ Outdoor unit can be mounted on a pole or wall. With the powerShot™, a standard PoE injector, the airBridge™ Outdoor can be powered over an outdoor rated Ethernet cable provided with the unit. airBridge™ Outdoor also features plug-and-play installation that enables quick and efficient deployment. It works with all WiFi™ compatible Access Points and eliminates complicated client installations and driver conflicts with various OS.

Easy to Monitor and Manage - AirBridge™ is supported by simpleMonitor, an advanced Management tool designed using Open Systems architecture. It utilizes popular network management standards (SNMP) to manage the wireless-centric network device parameters such as, channel selection, network association, data rate and site survey etc. Its graphical user interface is extremely intuitive for navigating, examining, and managing the airBridge™ Outdoor.

Technical Specs.

 

In StockAPPoutdoorContact Us to Buy