dwl-7230ap d-link xstack wireless access point 54mbps dwl7230ap dlk dlkdwl-7230ap

DWL-7230 xStack Access Point with PoE - 802.11a/g

Part#:	DWL-7230AP
Price:	$329.99

Features:
Designed for Use with xStack

Supports WPA2 Encryption

Supports 802.11a, 802.11b, & 802.11g

Supports Power over Ethernet

Not In StockDWL-7230APContact Us to Buy

D-Link DWL-7230AP Access Point designed specifically for business-class environments such as large or enterprise corporations, to provide secure and manageable wireless LAN options for network administrators.

The DWL-7230AP is based on the 802.11a/g standards and is backward compatible with 802.11b, ensuring compatibility with a wide range of wireless devices.

For advanced installations, this new high-speed Access Point has an integrated 802.3af Power over Ethernet (PoE) support, allowing installation of this device in areas where power outlets are not readily available. Since wireless security remains a strong concern among businesses, the DWL-7230AP provides Enhanced Wireless Security Features to ensure your data is protected from hackers. Support for WEP, WPA and WPA2 encryption guarantees the privacy of your network data. Rogue AP detection and containment ensure only the APs you install are able to function on your network.

Default IP Address for D-Link Access Point:

DWL-8200AP Default IP address: 192.168.0.50 (Username=admin, no password)
DWL-7200AP Default IP address: 192.168.0.50 (Username=admin, no password)
DWL-3200AP Default IP address: 192.168.0.50 (Username=admin, no password)
DWL-2200AP Default IP address: 192.168.0.50 (Username=admin, no password)
DWL-2100AP Default IP address: 192.168.0.50 (Username=admin, no password)

IEEE 802.11b

Standard

•	IEEE 802.11b

Radio and Modulation Type

•	DQPSK, DBPSK and CCK

Operating Frequency

•	2400 - 2497MHz ISM Band

Channel Numbers

•	11 Channels

Data Rate*

•	11, 5.5, 2 and 1Mbps

Media Access Protocol

•	CSMA/CA with ACK

Transmitter Output Power*

•	Typical 18dBm at 11, 5.5, 2 and 1Mbps

Receiver Sensitivity*

•	-85dBm for 11Mbps @ 8% PER (Packet Error Rate)
•	-88dBm @ 5.5Mbps @ 8% PER (Packet Error Rate)
•	-90dBm for 2Mbps @ 8% PER (Packet Error Rate)
•	-92dBm @ 1Mbps @ 8% PER (Packet Error Rate)

IEEE 802.11g

Standard

•	IEEE 802.11g

Radio and Modulation Type

•	BPSK, QPSK, 16QAM, 64QAM, OFDM

Operating Frequency

•	2400 - 2483.5MHz ISM Band

Channel Numbers

•	11 Channels

Data Rate*

•	54, 48, 36, 24, 18, 12, 9 and 6Mbps

Media Access Protocol

•	CSMA/CA with ACK

Transmitter Output Power*

•	+15dBm at 54Mbps
•	+14 ~ 16dBm at 48Mbps
•	+17dBm at 36Mbps
•	+18dBm at 24, 18, 12, 9, and 6Mbps

Receiver Sensitivity*

•	Typical Sensivity @ which frame (1000-byte PDUs) Error Rate = 10%
•	-85dBm at 6Mbps
•	-84dBm at 9Mbps
•	-82dBm at 12Mbps
•	-80dBm at 18Mbps
•	-77dBm at 24Mbps
•	-73dBm at 36Mbps
•	-69dBm at 48Mbps
•	-68dBm at 54Mbps

IEEE 802.11a

Standard

•	IEEE 802.11a

Radio and Modulation Type

•	BPSK, QPSK, 16QAM, 64QAM, OFDM

Operating Frequency

•	5.15 ~ 5.24GHz
•	5.745 ~ 5.805GHz

Channel Numbers

•	8 non-overlapping channels

Data Rate*

•	54, 48, 36, 24, 18, 12, 9 and 6Mbps

Media Access Protocol

•	CSMA/CA with ACK

Transmitter Output Power*

•	+12 ~ 15dBm at 54Mbps
•	+14 ~ 16dBm at 48Mbps
•	+17 ~ 18dBm at 36Mbps
•	+18 ~ 19dBm at 24, 18, 12, 9, and 6Mbps

Receiver Sensitivity*

•	Typical Sensivity @ Which Frame (1000-byte PDUs) Error Rate = 10%
•	-84dBm at 6Mbps
•	-83dBm at 9Mbps
•	-81dBm at 12Mbps
•	-79dBm at 18Mbps
•	-76dBm at 24Mbps
•	-72dBm at 36Mbps
•	-68dBm at 48Mbps
•	-67dBm at 54Mbps

General Product Specifications

Interface

•	Power Jack
•	Factory Reset Button
•	10/100Base-TX (UTP)
•	Wireless Dipole Antenna

External Antenna Type

•	Dipole antenna with 2dBi gain for 2.4GHz/5GHz

Internal Antenna Type

•	Printed antenna for 2.4GHz/5GHz

Ethernet Standard

•	IEEE 802.3, IEEE 802.3u, IEEE 802.3x

LEDs

•	Power, Speed, Wireless 802.11a & 802.11b/g

Physical Specifications

Dimensions (W x D x H)

•	7.6” x 5” x 1.3” (193 x 127 x 32mm)

Electrical & Emissions

Operating Voltage

•	48VDC +/- 10%

Current Consumption

•	Maximum 6W (8W with PoE)

Safety Agency Certifications & Environmental

Operating Temperature

•	32°F to 104°F (0°C to +40°C)

Non-Operating Temperature

•	-4°F to 149°F (-20°C to +65°C)

Operating Humidity

•	10% to 90% RH Non-condensing

Non-Operating Humidity

•

5% to 95%

USA

EMI (802.11a)

•	FCC Part 15.407 (b) Power limits: FCC Part 15.407 (a)

EMI (802.11g/b)

•	FCC part 15.247, 15.205, 15.209

Safety

•	UL 1950-3 CSA mark

Canada

EMI (802.11a)

•	Power limits: RSS-210 6.2.2 (91)

EMI (802.11g/b)

•	Power limits: RSS-210 6.2.2 (91)

Safety

•	CSA-International

Ordering Information

Part Number

•	*Description*

DWL-2130AP

•	xStack Access Point, 802.11g

DWL-2230AP

•	xStack PoE Access Point, 802.3af, 802.11g

DWL-7130AP

•	xStack Access Point, 802.11a/g

DWL-7230AP

•	xStack PoE Access Point, 802.3af, 802.11a/g

DXS-3227

•	xStack 24-Port Gigabit Wireless-Ready Switch + (4) Combo SFP Ports + (1) Fixed XFP Port + (2) Optional 10-Gig Copper/Fiber Uplinks (AP License Required)

DXS-3227P

•	xStack 24-Port PoE Gigabit Wireless-Ready Switch + (4) Combo SFP Ports + (1) Fixed XFP Port + (2) Optional 10-Gig Copper/Fiber Uplinks (AP License Required)

DXS-3250

•	xStack 48-Port Gigabit Wireless-Ready Switch + (4) Combo SFP Ports + (2) Optional 10-Gig Copper/Fiber Uplinks (AP License Required)

DWS-3227

•	xStack 24-Port Gigabit Unified Wireless Switch + 10 Gigabit Uplinks with 10AP license

DWS-3227P

•	xStack 24-Port Gigabit Unified Wireless Switch with PoE + 10 Gigabit Uplinks with 10AP license

DWS-3250

•	xStack 48-Port Gigabit Unified Wireless Switch + 10 Gigabit Uplinks with 10AP license