900 Mhz RF Amplifier, 1 watt, rf amp, extend the range of 900 mhz wireless radio devices, smartamp, gnswireless.com

900MHz RF Amplifier, 900MHz Series, 1 Watt

Part#:	GNS-12101
Price:	$499.99

Features:
Includes Amplifier, DC Injector and PS

NF Connectors

Operating Range: 900 - 928 MHz

0 dbm Minimum input

23 dBm Maximum input

In StockGNS-12101Contact Us to Buy

Designed for extending the range of 900 MHz wireless radio devices, the SmartAmp™ is particularly effective when used with Direct Sequence or Frequency Hopping Spread Spectrum radio modems. The unit provides the transmit power amplification as well as receive signal gain.

Full output power of 1W is achieved with only 4mW input to the amplifier. Above 4mW input, the SmartAmp attenuates the input signal power and maintains the output power typically at 1W. Substantial discounts available for OEMs and large volume purchases. Also available in 2.4 & 5.8GHz versions.

The built-in dynamic power sensor in SmartAmp™ adjusts the Radio Frequency (RF) power output level by reading the input signal power. This Automatic Gain Control (AGC) Technology. Teletronics' patented technology effectively making the RF amplifiers "Plug & Play" delivers the maximum output power at various input levels while keeping the distortion at a minimum.

Technical Specifications

Features:

1Watt

Operating Range:

902-928 MHz

Operating Mode:

Bi-directional, TDD

Transmit Gain*:

up to 24dB

Frequency Response:

± 1 dB

Output Power:

1 Watt (+30dBm)

TX Input Power:

0 dBm min
23 dBm max

Receiver Gain:

16 dB typical

Noise Figure:

3.5 dB typical

LED Inidicators:

RED	GREEN/ORANGE
Solid On: Power and Receiving mode Off: No Power	Blinking: Transmitting

Connectors:

N-type, female, 50 Ohm

Lightning Protection:

Quarter Wave Technology

DC Surge Protection:

Available

Power Consumption:

Tx = 1.2A, Rx = 130 mA @ 9VDC

Operating Temperature:

-40 °C to + 70 °C

Dimensions:

4.25" L x 3.25" W x 1.75" H

*Transmit Gain is automatically adjusted