2.4 Ghz RF Amplifier, 1 watt, rf amp, extend the range of 2.4 Ghz wireless radio devices, smartamp, gnswireless.com

2.4Ghz RF Amplifier, 2.4Ghz Series, 1 Watt Outdoor

Part#:	GNS-12206
Price:	$329.99

Features:
Includes Amplifier, DC Injector and PS

NF Connectors

Operating Range: 2400-2500 GHz

0 dbm Minimum input

23 dBm Maximum input

In StockGNS-12206Contact Us to Buy

Designed for extending the range of 2.4 GHz wireless radio devices, the SmartAmp™ is particularly effective when used with Direct Sequence or Frequency Hopping Spread Spectrum radio modems. The unit provides
the transmit power amplification as well as receive signal gain. Amplifier is placed outdoor next to Wi-Fi antenna, and the DC injector is placed inline, and located indoors near Wireless Access Point.

The built-in dynamic power sensor in SmartAmp™ adjusts the Radio Frequency (RF) power output level by reading the input signal power. This Automatic Gain Control (AGC) Technology, Teletronics' patented
technology effectively making the RF amplifiers "Plug & Play" delivers the maximum output power at various input levels while keeping the distortion at a minimum.

Ideal for increasing the range of low power radio devices and to
compensate for cable loss in certain installations.

Technical Specifications

Features:

1 Watt Outdoor

Operating Range:

2400 - 2500 MHz

Operating Mode:

Bi-directional, TDD

Transmit Gain*:

up to 24 dB

Frequency Response:

± 1 dB

Output Power:

1 Watt (+30 dBm)

TX Input Power:

0 dBm min
23 dBm max

Receiver Gain:

16 dB typical

Noise Figure:

3.5 dB typical

LED Inidicators:

RED	GREEN/ORANGE
Solid On: Power and Receiving mode Off: No Power	Blinking: Transmitting

Connectors:

N-type, female, 50 Ohm

Lightning Protection:

Quarter Wave Technology

DC Surge Protection:

Available

Power Consumption:

Tx = 1.2 A, Rx = 130 mA @ 9V DC

Operating Temperature:

-40 °C to + 70 °C

Dimensions:

4.25" L x 3.25" W x 1.75" H

*Transmit Gain is automatically adjusted