|
 |
|
Part#: |
GNS-12207 |
|
Price: |
$1395.99 |
Features:
Includes
Amplifier, and Power Supply
NF
Connectors
Operating
Range: 2400-2500 GHz
0
dbm Minimum input
23
dBm Maximum input
|
|
|
Designed for extending the range of 2.4 GHz wireless radio devices, the
SmartAmp™ is particularly effective when used with Direct Sequence or
Frequency Hopping Spread Spectrum radio modems. The unit provides
the transmit power amplification as well as receive signal gain.
The built-in dynamic power sensor in SmartAmp™ adjusts the Radio
Frequency (RF) power output level by reading the input signal power.
This Automatic Gain Control (AGC) Technology, Teletronics' patented
technology effectively making the RF amplifiers "Plug & Play" delivers
the maximum output power at various input levels while keeping the
distortion at a minimum.
The amplifier is placed outdoors, next to the Wi-Fi Antenna, and is
powered via the indoor DC injector. A coaxial cable is used to
connect the DC Injector to the indoor access point, and also between the
DC injector and the outdoor RF amplifier. The Wireless Access
Point should have no more then 200mW transmit power in order for the
amplifier to operate effectively.
Ideal for increasing the range of low power radio devices
and to
compensate for cable loss in certain installations.
Technical Specifications
|
|
Features: |
5 Watt Outdoor |
|
Operating Range: |
2400 - 2500 MHz |
|
Operating Mode: |
Bi-directional, TDD |
|
Transmit Gain*: |
up to 33 dB |
|
Frequency Response: |
± 1 dB |
|
Output Power: |
5 Watt (+37 dBm) |
|
TX Input Power: |
3 dBm min
23 dBm max |
|
Receiver Gain: |
10-14 dB, 12 dB typical |
|
Noise Figure: |
3.5 dB typical |
|
LED Inidicators: |
|
RED |
GREEN/ORANGE |
|
Solid On: Power
and Receiving mode
Off: No Power |
Blinking: Transmitting |
|
|
Connectors: |
N-type, female, 50 Ohm |
|
Lightning Protection: |
Quarter Wave Technology |
|
DC Surge Protection: |
Available |
|
Power Consumption: |
Tx = 3.3 A, Rx = 180 mA @ 12 V DC
|
|
Operating Temperature: |
-40 °C to + 70 °C |
|
Dimensions: |
6.0" L x 3.75" W x 1.19" H
(Heat Sink: 4.75" L x 7.5" W x 1.75" H) |
*Transmit Gain is automatically adjusted