|
 |
|
Part#: |
GNS-12209 |
|
Price: |
$2495.99 |
Features:
 Includes
Amplifier, DC Injector & PS
NF
Connectors
Operating
Range: 2400-2500 GHz
0
dbm Minimum input
23
dBm Maximum input
|
|
|
Designed for extending the range of 2.4 GHz wireless
radio devices, the Smart-Amp is particularly effective when used with
Direct Sequence or Frequency Hopping Spread Spectrum radio modems. The
unit provides transmit power amplification and receives signal gain.
Full output power of 10W is achieved with only 2.5mW
input to the amplifier. Above 2.5 mW input, the smartamp attenuates the
input signal power and maintains the output power typically at 10W.
Substantial discounts available for OEMs and large
volume purchases.
The amplifier is placed outdoors, next to the Wi-Fi Antenna, and is
powered via the indoor DC injector. A coaxial cable is used to
connect the DC Injector to the indoor access point, and also between the
DC injector and the outdoor RF amplifier. The Wireless Access
Point should have no more then 200mW transmit power in order for the
amplifier to operate effectively.
Ideal for increasing the range of low power radio devices
and to
compensate for cable loss in certain installations.
Technical Specifications
|
|
Features: |
10 Watt Outdoor |
|
Operating Range: |
2400 - 2500 MHz |
|
Operating Mode: |
Bi-directional, TDD |
|
Transmit Gain*: |
up to 36 dB |
|
Frequency Response: |
± 1 dB |
|
Output Power: |
10 Watt (+40 dBm) |
|
TX Input Power: |
3 dBm min
23 dBm max |
|
Receiver Gain: |
15 dB typical |
|
Noise Figure: |
3.5 dB typical |
|
LED Inidicators: |
|
RED |
GREEN/ORANGE |
|
Solid On: Power
and Receiving mode
Off: No Power |
Blinking: Transmitting |
|
|
Connectors: |
N-type, female, 50 Ohm |
|
Lightning Protection: |
Direct DC ground at antenna |
|
DC Surge Protection: |
600 Watts TVS @ 12 VDC |
|
Power Consumption: |
4.3 A @ 12VDC
|
|
Operating Temperature: |
-40 °C to + 60 °C |
|
Dimensions: |
7.5” L X 6.0” W X 3.0”H |
|
Weight: |
2.8 lbs |
*Transmit Gain is automatically adjusted
GNS-12209
