|
Great for
Deployment of Wireless Hotspot, Wi-Fi Hotspot at Marina,
Campground, RV Park
DUAL RADIO
CONFIGURATION = More Throughput
RADIO 1 = 802.11a, 5GHz
RADIO 2 = 802.11b/g, 2.4GHz
Local Wi-Fi
This outdoor access
point, from Teletronics' EZPlatform™ AP/Hotspot/Repeater is
designed for high-power environments that require long range, or
high power to overcome obstacles, other Wi-Fi devices, or cover
a large area. This AP can be configured as a main
broadcasting access point, or as a repeater to extend the range
in areas such as campgrounds, marinas, RV parks, or motel/hotel
setups.
The simplicity of use
of the EZPlatform™ allows operators to quickly bring service to
their customers, and with its two serial ports and two Ethernet
ports the unit can easily incorporate GPS, GPRS, RFID, VoIP,
surveillance cameras, field meters, motion sensors and data
networks for multiple industrial and commercial applications.
The EZPlatform™ is available in single or dual radio
configuration, with 1 W (2.4 GHz) and 600 mW (2.4/5.8 GHz) radio
card options.
All-Weather
Enclosure.
The 802.11b/g,
High-Power bridge is designed for outdoor all-weather deployment
and offers a robust weatherproof case that can protect itself
against rain, wind, and snow. For added security and privacy,
the access point has integrated WPA, WPA2, 64/128 bit WEP data security,
unlimited MACs, and Web and SNMP Management. The
included power-over-Ethernet injector, will allow you to mount
the AP up to 300ft. away from your network, for ease of
installation.

|
Hardware Specifications |
|
CPU |
Intel IXP425 network processor, 533 MHz |
|
Memory |
64
MB SDRAM |
|
Storage |
16 MB flash |
|
Ethernet interface |
Two
10BASE-T/100BASE-TX ports |
|
Serial interface |
Two
RS-232 ports |
|
Wireless interface |
Two
Mini PCI Type III slots |
|
LED indicators |
Power, WLAN1 status, WLAN2 status |
|
Power |
10-48 V DC PoE (Power over Ethernet) |
|
Power consumption |
25
W, maximum |
|
Dimensions |
8 x
7.5 x 2.5 in |
|
Weight |
7 lb |
|
Operating temperature |
-20
°C to +70 °C, non-condensing |
|
Enclosure |
NEMA
4, ruggedized and weatherproof |
|
Mounting |
Wall
mount, pole mount |
|
Technical Information |
|
Ethernet |
IEEE
802.3 10BASE-T/100BASE-TX with autonegotiation |
|
Networking |
Bridging mode, NAT gateway, static routing, RIPv2
dynamic routing
DHCP client, DHCP server
Static/dynamic VLAN, IEEE 802.1Q, management VLAN,
SSID-based tagging
PPPoE, DDNS, Spanning Tree Protocol, QoS (802.11e
and WMM), IPv6 |
|
Wireless |
802.11a/b/g (2.4/5.8 GHz, 700/900 MHz), turbo mode
Four SSIDs per interface, AP/client mode, ad hoc,
WDS, roaming
WEP, WPA, WPA2 encryption with hex/ASCII keys
Adjustable RF TX power and data rate
Hotspot: WiFiDog/RADIUS authentication, local/remote
captive portal |
|
Management |
HTTP/HTTPS web configuration interface, TELNET
SNMPv2, remote syslog, local event log
Bandwidth control and self-test with default and
host-specific upload/download rates
Configuration backup and restore, web-based firmware
upgrade
Serial port rescue console, EZManager support |
|
Security |
IP
address, MAC address and SSID filtering
Firewall, intra-BSS traffic blocking, wireless-wired
matching802.1X |
|
Boot loader |
RedBoot |
|
Operating System |
Linux, 2.6.x kernel |
|
Misc |
Default
IP address: 192.168.1.124
UN: admin
|| PW: admin
Grey Cat5
Ethernet cable: Cross Over Cable
Blue Cat5
Ethernet cable: Standard Cat5 patch cable
|
|