|
Connect your two locations up to 4 miles apart, using this easy
to install Wireless Bridge Kit. The antennas are
Integrated into the Motorola Canopy outdoor units. Each
Unit includes an outdoor Access Point with built in directional
antenna. Use this backhaul if you need a true throughput
of up to 7mbps between two locations that are up to 4 miles away. This
Bridge Kit will provide low latency, with high data throughput,
Great for VoIP applications.
Technical Details:
|
Description |
5.7 GHz
Backhaul Module 10 Mbps |
|
Canopy
Part Number |
5700BH |
|
Market
Availability |
North
America, South America, Asia |
|
Signaling Rate |
10 Mbps |
|
Typical
LOS Range |
4 miles |
|
Typical
Aggregate Useful Throughput |
7.5
Mbps |
|
Frequency range of band |
ISM
5725-5850 MHz |
|
Non-overlapping Channels |
6 |
|
Channel
Width |
20 MHz |
|
Channel
Spacing |
every 5
MHz |
|
Modulation Type |
High
Index 2-level Frequency Shift Keying (FSK) optimized for
interference rejection |
|
Encryption |
DES
capable |
|
Latency |
2.5
msec |
|
Carrier
to Interference ratio (C/I) |
<3 dB |
|
Nominal
Receiver Sensitivity (dbm typical) |
-86 |
|
Antenna
Gain (dB) |
7 |
|
Reflector Gain |
0 |
|
EIRP
(dB) |
30 |
|
Equivalent Isotropic Radiated Power (EIRP) |
1 W |
|
DC
Power (typical) |
0.34 A
@ 24 VDC = 8.2 W |
|
Antenna
Beam Width |
3 dB
antenna beam width 60 degrees, Azimuth and Elevation |
|
Temperature |
-40° C
to +55° C (-40° F to +131° F) |
|
Wind
Survival |
190
km/hr (118 miles/hr) |
|
Dimensions |
11.75
in H x 3.4 in W x 3.4 in D (29.9 cm H x 8.6 cm W x 8.6
cm D) |
|
Weight |
.45 kg
(1 lb) |
|
Access
Method |
Time
Division Duplex (TDD) |
|
Interface |
10/100
Base T, half/full duplex. Rate auto negotiated (802.3
compliant) |
|
Protocols Used |
IPV4,
UDP, TCP, ICMP, Telnet, HTTP, FTP, SNMP |
|
Network
Management |
HTTP,
TELNET, FTP, SNMP Version 2c |
|
FCC ID |
ABZ89FC5804 |
|
Industry Canada Certification Number |
109W-5700 |
|
NYCE |
0202CE08128 |
|
Two
Integrated Outdoor AP's
GNS-1110
