Mouse over Picture to View Back Panel.

This Wireless Bridge kit includes Two Outdoor Access Points, as well as 100ft. of cat5 network cable.

Features:

AES ENCRYPTED WIRELESS BRIDGE!
Integrated 21db Internal Antenna

Weather Proof Enclosure

Carrier Class QOS with Low Latency

54mbps Transfer Rate

Integrated PoE Adapter

Dual Ethernet Ports

100ft. of cat5 network cable

VoIP Applications & Streaming Video.

Low Latency (Ideal for Video and Voice)

Technical Specs.

This Wireless Bridge is a low latency wireless link, that will provide a seamless connection between your two locations.  Low latency is required when VoIP or Video is being streamed across the wireless link.  For a low latency connection, total packet delivery time needs to be 100ms or less.  For voice applications, low jitter is also important.  Jitter is the variation in latency, or the difference between the fastest and slowest packet response times.  This wireless link, will have both qualities, and assuming LOS can connect your locations up to 2 miles.  Contact us for more information.

This Outdoor 21db Integrated Access Point can be mounted outdoors, and can be powered through the integrated Power-over-Ethernet adapter that comes with the unit.  This means that this access point can be placed up to 300ft. away from your network, with only a single cat5 cable connecting to it.  This makes your network Installation easier to install and maintain. Each Access Point will be configured as a Bridge, and will only communicate with each other.  Your wireless bridge can also be configured with AES Encryption, which means a safer, and more secure network connection for your LAN.

This Wireless Bridge is connecting at a frequency above 5Ghz, which means if you have trees or other obstacles in the path of your Point-to-Point connection, you will still have a strong and solid connection.  Simply mount the enclosure outside in the direction of your remote location, connect the cat5 network cable to your LAN, and your ready for connectivity.

Ask us about pre-configuration of these Access Points, so they work "out of the box" and ready to install at your two locations.  

Features at a glance

• Dual Ethernet Ports:  This will allow you to daisy chain radios at your installation sites.  This can benefit you as an installer, as the dual Ethernet ports will allow you to plug in PoE devices such as network cameras or other Outdoor Access Points.

• More Robost Routing Features:  Includes Tunneling Protocol Support, which will allow you to pass through VPN clients, as well as use tunneling protocols such as VPN, PPTP, RSA and others.

• All New Access Point Features:  WDS will allow this Outdoor Access Point to be wirelessly connected to other Access Points, while still servicing clients.  (Wireless Distribution System)

• Wi-Fi Protected Access (WPA):  Wireless Protected Access impoves on the security features of WEP.  It includes impoved data encryption and user authentication, and AES Encryption.

• All New Client Adapter Features:  With this Outdoor Access Point, you will be able to align your client and point-to-point installations without having to log into the radio.  You will get visual signal strength at a glance by using this great new feature, using the alignment LED's located on the back of the Access Point.

• Controllable High Gain Output:  Both radios have 13dBm maximum output.  This works great for long distance Point-to-Point applications, as well as Client applications.  Power can be scaled back for closer installations to avoid noise issues and to meet local regulatory requirements.

• Wireless Security:  WEP, WPA wireless security is included in this wireless backhaul.  This will encrypt the data being sent between the connection.  Also included in this wireless backhaul is AES encryption, which is a higher level security feature then standard WEP/WPA.  The two radios can also be configured in PXP mode, which enables only the two outdoor access points to communicate with each other, avoiding any other access to the network.  The wireless bridge operates seamlessly as a Wireless Bridge between your two locations.

• Wireless Interference:  This wireless Ethernet Bridge is operating at 5Ghz.  At most locations, this frequency is used less frequently then the standard 802.11b/g, so interference is usually minimized.  If you experience interference at this frequency, check that your antennas are not mounted directly on a metal surface, have line of sight between each other, and try changing the channel to one that is available .  You may also want to move to a 802.11b/g, 2.4GHz wireless bridge. Click here for an 802.11b/g wireless bridge.

Technical Specs.

Specifications are subject to change without notice.

Subject to local regulations.

 

In StockGNS-1120Contact Us to Buy