Mouse over Picture to View Back Panel.

This Wireless Bridge kit includes Two Outdoor Access Points, as well as 100ft. of cat5 network cable.

Features:
Integrated 15db Internal Antenna

Weather Proof Enclosure

Carrier Class QOS with Low Latency

54mbps Transfer Rate

Integrated PoE Adapter

Dual Ethernet Ports

100ft. of cat5 network cable included

Great for Sharing Internet/Files

Low Latency (Ideal for Video and Voice)

Technical Specs.

This Wireless Ethernet Bridge will provide alow latency wireless connection, that will provide a seamless, transparent connection between your two locations.  Low latency is required when VoIP or Video is being streamed across the wireless link.  This Wireless Backhaul operates at 54Mbps aggregated throughput, with a usable throughput of about 25-29Mbps. 

For a low latency connection, total packet delivery time needs to be 100ms or less.  For voice applications, low jitter is also important.  Jitter is the variation in latency, or the difference between the fastest and slowest packet response times.  This wireless Ethernet backhaul, will have both qualities, and assuming your locations have LOS, can connect your two points up to 2 miles apart.  Contact us for more information.

This Outdoor 15db Integrated Wi Fi Access Point can be mounted outdoors, and can be powered through the integrated Power-over-Ethernet adapter that comes with the unit.  This means that this access point can be placed up to 300ft. away from your network, with only a single cat5 cable connecting to it.  This makes your network Installation easier to install and maintain. Each Access Point will be configured as a Bridge, and will only communicate with each other.  This means a safer, and more secure network connection for your LAN.

Log into the outdoor unit via a cat5 cable, configure the settings to best suit your network, and your ready for installation.  Simply mount the enclosure outside in the direction of your remote location, connect the cat5 network cable to your LAN, and your ready for connectivity.

Please note that this Wireless Bridge requires your two locations to have Line of Sight.  For more information, or to discuss your particular situation, please contact us anytime.  To see other Wireless Bridge packages that do not require Line of Sight, Click Here.

Features at a glance

• Dual Ethernet Ports:  This will allow you to daisy chain radios at your installation sites.  This can benefit you as an installer, as the dual Ethernet ports will allow you to plug in PoE devices such as network cameras or other Outdoor Access Points.

• More Robost Routing Features:  Includes Tunneling Protocol Support, which will allow you to pass through VPN clients, as well as use tunneling protocols such as VPN, PPTP, RSA and others.

• All New Access Point Features:  WDS will allow this Outdoor Access Point to be wirelessly connected to other Access Points, while still servicing clients.  (Wireless Distribution System)

• Wi-Fi Protected Access (WPA):  Wireless Protected Access impoves on the security features of WEP.  It includes impoved data encryption and user authentication.

• All New Client Adapter Features:  With this Outdoor Access Point, you will be able to align your client and point-to-point installations without having to log into the radio.  You will get visual signal strength at a glance by using this great new feature, using the alignment LED's located on the back of the Access Point.

• Controllable High Gain Output:  Both radios have 13dBm maximum output.  This works great for long distance Point-to-Point applications, as well as Client applications.  Power can be scaled back for closer installations to avoid noise issues and to meet local regulatory requirements.

• Wireless Security:  WEP, WPA wireless security is included in this wireless backhaul.  This will encrypt the data being sent between the connection.  Also included in this wireless backhaul is AES encryption, which is a higher level security feature then standard WEP/WPA.  The two radios can also be configured in PXP mode, which enables only the two outdoor access points to communicate with each other, avoiding any other access to the network.  The wireless bridge operates seamlessly as a Wireless Bridge between your two locations.

• Wireless Interference:  This wireless Ethernet Bridge is operating at 2.4Ghz.  This means that if you have a high number of 802.11b/g nodes around your two locations, it is possible that you will experience interference.  This can result in poor point to point wireless performance, dropped packets, slow connection, and high latency.  To avoid the Interference of other 802.11b/g radios, move to a 802.11a, 5Ghz point to point wireless bridge.  Click here for an 802.11a wireless bridge.

Technical Specs.

Specifications are subject to change without notice.

Subject to local regulations.

 

In StockGNS-1125Contact Us to Buy