Mouse over Picture to View Back Panel.

Two 24dbi Wi Fi Grid Antennas Included.

This Wireless Bridge kit includes Two Outdoor Access Points, Two 24dbi Grid Antennas, and Two 4ft. coax pigtail cables.  All Mounting Hardware also included.

Features:
Audio Tone Antenna Alignment

Remote Web Management

Carrier Class QOS with Low Latency

High Transmit Radio Power

Built In Link Analysis Tools

Dual Frequency (2.4Ghz and 5.xGHz)

100ft. of cat5 network cable

Great for VoIP Applications

   and Streaming Video.

Conservative Estimate of 10 miles Pt to Pt.

The GNS-1131, outdoor Point to Point Wireless Bridge,  is our first multi-band, Near Line of Sight wireless backhaul solution for Wireless Internet Service Providers (WISPs), Operators and other Large Scale Enterprise Networks. The GNS-1131 is a multi-band radio which operates in the license free 2.4 GHz or 5.2 GHz to 5.8 GHz bands (software selectable) to deliver 23 non-overlapping channels. This means that if you are looking for a high throughput, low latency solution to connect your two or more locations of up to an estimated 10 miles, this is the package for you.

The Point-to-Point Wireless Bridge, GNS-1131 provides as much as 15 Mbps of data throughput and a range of up to 10 miles (conservative estimate).   This particular setup includes hardware that will extend the range of the 5 Ghz antenna spectrum, which is typically used for point to point backhaul situations. 

The 5Ghz frequency is non interfering with the 2.4GHz Wi Fi frequency, therefore allowing you to use this point to point wireless bridge in a crowded 2.4GHz area.

Supporting the superior RF performance are the network processing capabilities built with a host of intelligent Layer 3 networking features. These built-in wide area edge router capabilities allow the operators to deploy large, scalable and hierarchical networks.

• High performance Near Line of Sight Point-to-Point backhaul system
   

• COFDM technology to ensure high data rates, high spectral efficiency, and immunity to interference and multi-path delays
   

• Multi-band radio with 23 non-overlapping channels^* uses advanced RF interference mitigation
   

• High transmit radio power and ultra high receive sensitivity for LongRange™ coverage
   

• Adaptive modulation with automatic multi-rate selection to maximize throughput according to radio link performance
   

• Wireless backhaul with integrated Layer 3 wide area edge router functions and Spanning Tree Protocol
   

• Secure data communication using 128 bit WEP and Wi-Fi Protected Access (WPA - IEEE 802.11i)
   

• Remote Web and SNMP based Management
   

• Built in tools to analyze and monitor link condition
   

• Purpose built for harsh outdoor environments

Intelligent Networking for the Wireless Ethernet Backhaul   Supporting the superior RF performance are the network processing capabilities combined with a host of intelligent Layer 3 networking features. These built-in wide area edge router capabilities allow the operators to deploy large, scalable and hierarchical networks. The Spanning Tree Protocol facilitates installation of redundancy in the network. The WatchGuard feature of the airHaul continuously monitors the device and performs an automatic recovery for realizing high system availability. The GNS-1131 has a unified Web and SNMP (MIB II compliant) based remote management interface. This means quick integration with the industry leading EMS solutions. This point to point wireless bridge will offer the most superior performance for a wireless backhaul.   Carrier Class Attributes   The outdoor access point with electrical overstress protection can withstand harsh outdoor operating environments ranging from -49º F to 140º F (-45º C to +60º C) and very humid or dry conditions. The rust proof plenum rated metal enclosure with enclosed N-connectors give added protection from environmental conditions.   Quick and Easy Deployment   Field installation is expensive and time-consuming; therefore, the GNS-1131wireless bridge kit is designed for rapid out-of-the-box installation. With the easy-to-use backhaul, simple-to-use software and audio tone antenna alignment aid, the network can be setup rapidly and cost-effectively.  With the included power over Ethernet adapter, simply mount the unit outdoors, and run your outdoor Ethernet cable down to your indoor network hub or switch for power. Picture to the right shows the enclosed N connectors, for added protection against outdoor installations.

 

In StockGNS-1131Contact Us to Buy