Mouse over Picture to View Back Panel.

29dbi Dish Antenna Included

This Wireless Bridge kit includes Two Outdoor 5.8Ghz Access Points, 29dbi Dish Antennas, as well as 100ft. of cat5 network cable, Power Supply and Mounting Kit.

Features:
External 29dbi Dish Antenna

4ft. Coax cable to connect Antenna to AP

Outdoor Weather Proof Enclosure

Carrier Class QOS with Low Latency

54mbps Transfer Rate at 5.8Ghz

Integrated PoE Adapter included

Near Line of Sight  Bridging Solution.

100ft. of cat5 network cable included

Perfect for Long Range Backhaul

Technical Specs.

Ask us about Pre-Configuration...so your unit works right out of the box.

This Outdoor Access Point can be mounted outdoors, and connected directly to the outdoor 29dbi Dish Antenna for maximum Wireless Range.  This unit can be powered through the integrated Power-over-Ethernet adapter that comes with the unit.  If you are looking to connect multiple locations, and the distance is greater then 3 miles apart, then this solution will work for you.

The 5.8Ghz access point can be placed up to 300ft. away from your network, with only a single cat5 cable connecting to it.  This makes your network Installation easier to install and maintain. Each Access Point will be configured as a Point to Point Bridge, and will only communicate with each other.  These units can be configured with AES encryption for maximum security.  This means a safer, and more secure network connection for your LAN.

This Wireless Bridge is connecting at a frequency of 5.8Ghz, which means if you have small trees or other obstacles in the path of your Point-to-Point connection, you will still have a strong and solid wireless connection.  Simply mount the enclosure outside in the direction of your remote location, mount the dish antenna, connect the cat5 network cable to your LAN, and your ready for connectivity.  This bridge includes security measures of 40 and 128bit WEP, Media Access Control, and WPA.

Features at a glance

• Dual Ethernet Ports:  This will allow you to daisy chain radios at your installation sites.  This can benefit you as an installer, as the dual Ethernet ports will allow you to plug in PoE devices such as network cameras or other Outdoor Access Points.

• More Robost Routing Features:  Includes Tunneling Protocol Support, which will allow you to pass through VPN clients, as well as use tunneling protocols such as VPN, PPTP, RSA and others.

• All New Access Point Features:  WDS will allow this Outdoor Access Point to be wirelessly connected to other Access Points, while still servicing clients.  (Wireless Distribution System)

• Wi-Fi Protected Access (WPA):  Wireless Protected Access impoves on the security features of WEP.  It includes impoved data encryption and user authentication.

• All New Client Adapter Features:  With this Outdoor Access Point, you will be able to align your client and point-to-point installations without having to log into the radio.  You will get visual signal strength at a glance by using this great new feature, using the alignment LED's located on the back of the Access Point.

• Controllable High Gain Output:  Both radios have 23dBm maximum output.  This works great for long distance Point-to-Point applications, as well as Client applications.  Power can be scaled back for closer installations to avoid noise issues and to meet local regulatory requirements.

Specifications are subject to change without notice.

Subject to local regulations.

 

In StockGNS-1134Contact Us to Buy