Mouse over Picture to View Back Panel.

This Wireless Bridge kit includes Two Outdoor 900mhz Access Points, 14dbi Yagi Antennas, as well as 100ft. of cat5 network cable, Power Supply and Mounting Kit.

Features:
External 14dbi Yagi Antenna

5ft. Coax cable to connect Antenna to AP

Outdoor Weather Proof Enclosure

Carrier Class QOS with Low Latency

54mbps Transfer Rate at 900Mhz

Integrated PoE Adapter included

Non Line of Sight  Bridging Solution.

100ft. of cat5 network cable included

Perfect for NLOS Backhaul

Technical Specs.

Ask us about Pre-Configuration...so your unit works right out of the box.

This Outdoor Access Point can be mounted outdoors, and connected directly to the outdoor 14dbi Yagi Antenna for maximum Wireless Range.  This unit can be powered through the integrated Power-over-Ethernet adapter that comes with the unit.  If you are looking to connect multiple locations, and the distance is greater then 2 miles apart, then this solution will work for you.  When trees or other obstructions such as small homes or buildings are in between your two points, the GNS-1135 is the solution. 

The 900Mhz Outdoor Access Point can be placed up to 300ft. away from your network, with only a single cat5 cable connecting to it.  This makes your network Installation easier to install and maintain. Each Outdoor Access Point will be configured as a Point to Point Bridge, and will only communicate with each other.  These units can be configured with AES encryption for maximum security.  This means a safer, and more secure network connection for your LAN.

This Wireless Bridge is connecting at a frequency of 900Mhz, which means if you have large trees or other obstacles in the path of your Point-to-Point connection, you will still have a strong and solid wireless connection.  Simply mount the enclosure outside in the direction of your remote location, mount the yagi antenna, connect the cat5 network cable to your LAN, and your ready for connectivity.  This bridge includes security measures of 40 and 128bit  Access Control, and WPA.

Please do not use this bridge kit if you are close to a High Gain Cellular Tower, or near any govt. agencies such as Fire Department, Police Station, or Ambulance Center, as your signal will have a large degree of interference. Contact us for more details, or view the GNS-1134 for replacement.

Features at a glance

• Dual Ethernet Ports:  This will allow you to daisy chain radios at your installation sites.  This can benefit you as an installer, as the dual Ethernet ports will allow you to plug in PoE devices such as network cameras or other Outdoor Access Points.

• More Robost Routing Features:  Includes Tunneling Protocol Support, which will allow you to pass through VPN clients, as well as use tunneling protocols such as VPN, PPTP, RSA and others.

• All New Access Point Features:  WDS will allow this Outdoor Access Point to be wirelessly connected to other Access Points, while still servicing clients.  (Wireless Distribution System)

• Wi-Fi Protected Access (WPA):  Wireless Protected Access impoves on the security features of WEP.  It includes improved data encryption and user authentication.  AES encyption is available over your point to point wireless bridge. 

• All New Client Adapter Features:  With this Outdoor Access Point, you will be able to align your client and point-to-point installations without having to log into the radio.  You will get visual signal strength at a glance by using this great new feature, using the alignment LED's located on the back of the Access Point.

• Controllable High Gain Output:  Both radios have 23dBm maximum output.  This works great for long distance Point-to-Point applications, as well as Client applications.  Power can be scaled back for closer installations to avoid noise issues and to meet local regulatory requirements.

• Real Time Throughput Speed: While the throughput speed is operating at the 802.11 54Mbps speed, the real time throughput will vary depending on what types of obstructions you are attempting to penetrate, and how far apart your antennas are.  Call for more information.

• Wi Fi Wireless Security:  WEP, WPA wireless security is included in this wireless backhaul.  This will encrypt the data being sent between the connection.  Also included in this wireless backhaul is AES encryption, which is a higher level security feature then standard WEP/WPA.  The two radios can also be configured in PXP mode, which enables only the two outdoor access points to communicate with each other, avoiding any other access to the network.  The wireless bridge operates seamlessly as a Wireless Bridge between your two locations.

Specifications are subject to change without notice.

Subject to local regulations.

 

In StockGNS-1135Contact Us to Buy