|
Connect your two locations up to 5 miles apart, using this easy
to install Wireless Point to Point backhaul, using the reliable
Motorola Canopy 2.4ghz Backhaul. The antennas are
Integrated into the Motorola Canopy outdoor enclosure.
Each Unit includes an outdoor Access Point with built in
directional antenna, giving you longer
range, and a more robust signal. Use this backhaul if you need a true throughput
of up to an estimated 7mbps between two locations that are up to
5 miles away, clear Line of Sight). This
Motorola Wireless Bridge Kit will provide low latency, with high data throughput,
Great for VoIP Wi Fi applications.
|
 |
For additional protection from
surges, or other surge induced electricity that
may travel through the Ethernet
cable, please use the 300SS
surge protector.
Indoor/Outdoor Canopy
Surge Protector
Part#: 300SSB
Price: $32.99 |
|
Technical Details:
| Canopy
Part Number |
2400BHDD |
|
Description |
PTP
24100 Lite - High power |
|
Signaling Rate |
10
Mbps |
|
Typical LOS Range |
5 Mi
(8 km) |
|
Typical Aggregate Useful Throughput |
7.5
Mbps |
|
Frequency range of band |
ISM
2400-2483.5 MHz |
|
Non-overlapping Channels |
3 |
|
Channel Width |
20 MHz |
|
Modulation Type |
High
Index 2-level Frequency Shift Keying (FSK) optimized for
interference rejection |
|
Channel Spacing |
every
2.5 MHz |
|
Encryption |
DES
capable |
|
Latency |
2.5
msec |
|
Carrier to Interference ratio (C/I) |
~3dB @
10 Mbps, ~10dB @ 20 Mbps at -65dBm |
|
Nominal Receiver Sensitivity (dbm typical) |
-86
dBm |
|
Antenna Gain (dB) |
8 dB |
| EIRP
(dB) |
Adjustable |
|
Equivalent Isotropic Radiated Power (EIRP) |
Adjustable from 10 mW to 2.0 W |
| DC
Power (typical) |
0.34 A
@ 24 VDC = 8.2 W |
|
Antenna Beam Width |
3 dB
antenna beam width 60 degrees, Azimuth and Elevation |
| Mean
Time Between Failure (MTBF) |
40 yr |
|
Temperature |
-40° C
to +55° C (-40° F to +131° F) |
| Wind
Survival |
190
km/hr (118 miles/hr) |
|
Dimensions |
11.75
in H x 3.4 in W x 3.4 in D (29.9 cm H x 8.6 cm W x 8.6
cm D) |
| Weight |
.45 kg
(1 lb) |
| Access
Method |
Time
Division Duplex (TDD) |
|
Interface |
10/100
Base T, half/full duplex. Rate auto negotiated (802.3
compliant) |
|
Protocols Used |
IPV4,
UDP, TCP, ICMP, Telnet, HTTP, FTP, SNMP |
|
Network Management |
HTTP,
TELNET, FTP, SNMP Version 2c |
| FCC ID |
ABZ89FC5808 |
|
Industry Canada Certification Number |
109W-2400 |
| Please Note: The
wireless bridge kits listed on this page may also be
referred to as 802.11 bridge 802.11 Ethernet
bridge, 802.11g wireless bridge, belkin wireless bridge,
d link wireless bridge , dlink wifi repeater, dlink
wireless bridge, Ethernet bridge router, how to wireless
bridge, internet wireless bridge, Linksys point to point
wireless , Linksys wifi bridge, Linksys wifi repeater,
long range wifi bridge, long range wireless Ethernet
bridge, netgear network bridge, netgear wireless bridge,
netgear wireless network bridge, outdoor access point
bridge, outdoor Ethernet bridge, outdoor wifi bridge,
outdoor wireless access point, outdoor wireless bridges,
outdoor wireless Ethernet bridge, outdoor wireless point
to point, point to multipoint bridge, point to point
Ethernet bridge, point to point network connection,
point to point router, point to point wifi bridge, point
to point wireless bridging, point to point wireless
connection, point to point wireless Ethernet, point to
point wireless internet, point to point wireless
networks, secure wireless bridge, set up wireless
bridge, setting up wireless bridge, wifi bridge router,
wifi client bridge, wireless access point bridge,
wireless bridge access point, wireless bridge antenna,
wireless bridge connection, wireless bridge kits,
wireless bridge point to multipoint, wireless bridge
router, wireless bridge setup, wireless bridge wds,
wireless lan bridge, wireless network bridge Ethernet,
wireless network bridge, wireless networking bridge,
wireless repeater bridge, wireless to wireless bridge,
5ghz point to point wireless backhaul, T1 replacement
wireless bridge, T1 point to point, Fiber wireless
backhaul. |
|