|
Connect your two locations up to 2 miles apart, using this easy
to install Wireless Point to Point backhaul, using the reliable
Motorola Canopy 2.4ghz Backhauls. The antennas are
Integrated into the Motorola Canopy outdoor units. Each
Unit includes an outdoor Access Point with built in directional
antenna. Use this backhaul if you need a true throughput
of up to an estimated 15mbps between two locations that are up to
2 miles away, (conservative estimate). This
Bridge Kit will provide low latency, with high data throughput,
Great for VoIP applications.
|
 |
For additional protection from
surges, or other surge induced electricity that
may travel through the Ethernet
cable, please use the 300SS
surge protector.
Indoor/Outdoor Canopy
Surge Protector
Part#: 300SSB
Price: $32.99 |
|
Technical Details:
| Canopy
Part Number |
2400BH20DD |
|
Description |
PTP
24100 Full - High power |
| Market
Availability |
North
America, South America, Asia |
|
Signaling Rate |
20
Mbps |
|
Typical LOS Range |
2 mi
(3.2 km) |
|
Typical Aggregate Useful Throughput |
14.0
Mbps |
|
Frequency range of band |
ISM
2400-2483.5 MHz |
|
Non-overlapping Channels |
3 |
|
Channel Width |
20 MHz |
|
Modulation Type |
High
Index 4-level Frequency Shift Keying (FSK) optimized for
interference rejection |
|
Channel Spacing |
every
2.5 MHz |
|
Encryption |
DES
capable |
|
Latency |
2.5 |
|
Carrier to Interference ratio (C/I) |
~3dB @
10 Mbps, ~10dB @ 20 Mbps at -65dBm |
|
Nominal Receiver Sensitivity (dbm typical) |
-79
dBm |
|
Antenna Gain (dB) |
8 dB |
| EIRP
(dB) |
Adjustable |
|
Equivalent Isotropic Radiated Power (EIRP) |
Adjustable from 10 mW to 2.0 W |
| DC
Power (typical) |
0.34 A
@ 24 VDC = 8.2 W |
|
Antenna Beam Width |
3 dB
antenna beam width 60 degrees, Azimuth and Elevation |
| Mean
Time Between Failure (MTBF) |
40 yr |
|
Temperature |
-40° C
to +55° C (-40° F to +131° F) |
| Wind
Survival |
190
km/hr (118 miles/hr) |
|
Dimensions |
11.75
in H x 3.4 in W x 3.4 in D (29.9 cm H x 8.6 cm W x 8.6
cm D) |
| Weight |
.45 kg
(1 lb) |
| Access
Method |
Time
Division Duplex (TDD) |
|
Interface |
10/100
Base T, half/full duplex. Rate auto negotiated (802.3
compliant) |
|
Protocols Used |
IPV4,
UDP, TCP, ICMP, Telnet, HTTP, FTP, SNMP |
|
Network Management |
HTTP,
TELNET, FTP, SNMP Version 2c |
| FCC ID |
ABZ89FC5808 |
|
Industry Canada Certification Number |
109W-2400 |
|