|
 |
|
Part#: |
GNS-1149 |
|
Price: |
$3995 |
Features:
Two
Canopy 5700BHRF20DD's
Two
Canopy Reflector's
Two Power
Supplies
Two 25ft.
cat5 Ethernet Cables
Connect
Two Locations 5 miles apart
Requires Line of Sight
Does
Not Include
Mounting Brackets
Does
not include Surge protectors.
Click
Here for Mounting Hardware
Download
Spec Sheet
|
|
Connect your two locations up to 35 miles apart, using this easy
to install Wireless Point to Point backhaul, using the reliable
Motorola Canopy 5.8ghz Wireless Backhaul, with high gain
reflector. The antennas are
Integrated into the Motorola Canopy outdoor units, and use the
reflector to achieve a longer distance. Each
Unit includes an outdoor Access Point with built in directional
antenna. Use this backhaul if you need a true throughput
of up to an estimated 15Mbps between two locations that are up to
35 miles away, (conservative estimate), and are in a crowded
2.4GHz area. This
Bridge Kit will provide low latency, with high data throughput,
Great for VoIP applications, and long range wireless backhauls.
|
 |
For additional protection from
surges, or other surge induced electricity that
may travel through the Ethernet
cable, please use the 300SS
surge protector.
Indoor/Outdoor Canopy
Surge Protector
Part#: 300SSB
Price: $32.99 |
|
Technical Details:
|
Canopy Part Number |
5700BHRF20DD |
|
Description |
PTP 58100 Full - Reflector |
|
Market Availability |
North America, Europe, South
America, Asia |
|
Signaling Rate |
20 Mbps |
|
Typical LOS Range |
35 mi (56 km) |
|
Typical Aggregate Useful
Throughput |
14.0 Mbps |
|
Frequency range of band |
ISM 5725-5850 MHz |
|
Non-overlapping Channels |
6 |
|
Channel Width |
20 MHz |
|
Modulation Type |
High Index 4-level Frequency
Shift Keying (BFSK) optimized
for interference rejection,
4-Level FSK |
|
Channel Spacing |
every 5 MHz |
|
Encryption |
DES capable |
|
Latency |
2.5 msec |
|
Carrier to Interference ratio
(C/I) |
~3dB @ 10 Mbps, ~10dB @ 20 Mbps
at -65dBm |
|
Nominal Receiver Sensitivity (dbm
typical) |
-79 dB |
|
Antenna Gain (dB) |
7 dB |
|
Reflector Gain |
18 dB |
|
EIRP (dB) |
48 dB |
|
Equivalent Isotropic Radiated
Power (EIRP) |
63 W |
|
DC Power (typical) |
0.34 A @ 24 VDC = 8.2 W |
|
Antenna Beam Width |
3 dB antenna beam width 6
degrees, Azimuth and Elevation |
|
Mean Time Between Failure (MTBF) |
40 yr |
|
Temperature |
-40° C to +55° C (-40° F to
+131° F) |
|
Wind Survival |
190 km/hr (118 miles/hr) |
|
Dimensions |
Module: 11.75 in H x 3.4 in W x
3.4 in D (29.9 cm H x 8.6 cm W x
8.6 cm D). Passive Reflector: 18
inch H x 24 in W (45 cm H x 60
cm W) |
|
Weight |
.45 kg (1 lb), 3.0 kg (6.5 lbs)
with passive reflector |
|
Access Method |
Time Division Duplex (TDD) |
|
Interface |
10/100 Base T, half/full duplex.
Rate auto negotiated (802.3
compliant) |
|
Protocols Used |
IPV4, UDP, TCP, ICMP, Telnet,
HTTP, FTP, SNMP |
|
Network Management |
HTTP, TELNET, FTP, SNMP Version
2c |
|
FCC ID |
ISM ABZ89FC5804 |
|
Industry Canada Certification
Number |
109W-5700 |
|
NYCE |
0202CE08128 |
Specifications subject to change without
notice. |
|
|