|
Extend the range of
either your indoor or outdoor access point with a simple, and
cost effective outdoor omni antenna. This 8dbi omni
antenna is best used for applications where you need to run an
extention cable from your desktop/Access point to the antenna.
Best when used with less then 20ft. of loss loss coax cable.
When longer runs of extension cable are needed, please upgrade
the antenna to a higher gain omni antenna, such as a 9dbi,
12dbi, or 15dbi omni.
Mounting hardware is
included, and can mount to a flat surface or to a pole.
Please contact us for more information. Call today: (516)
214-0321.
|
Please note:
Typical Wireless Range will be
dependent on the following:
| |
- Transmit Power of your Access Point or
Wi Fi Router
- Outdoor Obstructions (trees, lakes,
buildings, RV's, hills, etc.)
- Type of building material (metal,
aluminum, wood, sheetrock)
- Mounting position of antenna
- dbi Gain of the outdoor antenna
- Length of coax cable connected to the
antenna
- Client device receive sensitivity, and
transmit power
|
The stronger
the transmit power of the access point, the better your
wireless signal will carry, and provide a more enjoyable
Internet surfing experience for your customers.
The Transmit Power on typical Linksys, Dlink and Belkin
Wireless Access Points or Wi Fi Routers, is usually in the
15dbm range, or 32mW Transmit Power. This means
that connecting a high gain antenna will help your
range, but will not provide the increased distance and
signal strength that say a 200mW, or even 500mW Access
Point will provide. To get the best range from
your outdoor antenna, please ask us about upgrading your Linksys or D-Link Access point.
|

|
Technical
information |
|
Frequency:
|
2400 -
2483MHz |
|
Gain:
|
8 dBi |
|
Polarization:
|
Vertical |
|
Beamwidth deg: vertical &
horizontal
|
Horizontal: 360° Vertical: 15° |
|
SWR:
|
<1.5:1 |
|
Impedance:
|
50 Ohm |
|
Dimensions |
|
Length:
|
15 inch |
|
Weight:
|
300g |
|
Connector:
|
N-type Female |

|