|
Extend the range of
either your indoor or outdoor access point with a simple, and
cost effective outdoor Omni antenna. This 8dBi Omni
antenna is best used for applications where you need to run an
extension cable from your desktop/Access point to the antenna.
Best when used with less then 20ft. of loss loss coax cable.
When longer runs of extension cable are needed, please upgrade
the antenna to a higher gain Omni antenna, such as a 9dBi,
12dBi, or 15dBi Omni.
Mounting hardware is
included, and can mount to a flat surface or to a pole.
Please contact us for more information. Call today: (516)
214-0321.
|
Please note:
Typical Wireless Range will be
dependent on the following:
| |
- Transmit Power of your Access Point or
Wi Fi Router
- Outdoor Obstructions (trees, lakes,
buildings, RV's, hills, etc.)
- Type of building material (metal,
aluminum, wood, sheetrock)
- Mounting position of antenna
- dBi Gain of the outdoor antenna
- Length of coax cable connected to the
antenna
- Client device receive sensitivity, and
transmit power
|
The stronger
the transmit power of the access point, the better your
wireless signal will carry, and provide a more enjoyable
Internet surfing experience for your customers.
The Transmit Power on typical Linksys, Dlink and Belkin
Wireless Access Points or Wi-Fi Routers, is usually in the
15dbm range, or 32mW Transmit Power. This means
that connecting a high gain antenna will help your
range, but will not provide the increased distance and
signal strength that say a 200mW, or even 500mW Access
Point will provide. To get the best range from
your outdoor antenna, please ask us about upgrading your Linksys or D-Link Access point.
|
|
Technical
information |
|
Frequency:
|
2400 -
2483MHz |
|
Gain:
|
8 dBi |
|
Polarization:
|
Vertical |
|
Beam width deg: vertical &
horizontal
|
Horizontal: 360° Vertical: 15° |
|
SWR:
|
<1.5：1 |
|
Impedance:
|
50 Ohm |
|
Dimensions |
|
Length:
|
15 inch |
|
Weight:
|
300g |
|
Connector:
|
N-type Female |
|
Range=
500 ft. (Pt. to Mp.)
GNS-1402
