Connect this 2.4GHz Outdoor Grid Antenna to any of your Indoor or Outdoor Wireless Access Points.  This 2.4Ghz Grid Antenna works great for connecting two locations wirelessly, sharing data, or using a VoIP wireless link.  With the appropriate coax cable you will be able to connect this 2.4GHz Wi-Fi antenna to any Linksys, Cisco, D-Link, Netgear, ZyXel or other Wireless Access Point for increased Wi Fi signal strength. 

Click here for Coax Extension Cable.

 

Connect this antenna to your Linksys or D-link wireless router, for increased wireless coverage.  Connect 2 buildings up to 4 miles away with this 24dbi grid antenna.  For added protection, add a Lightning Arrestor  that will fit inline with the cables provided, part# GNS-4000.

 

If you are unsure if this will connect to your device, please contact us to be sure.

 

Please note:  Typical Wireless Range will be dependent on the following:   Transmit Power of your Access Point or Wi Fi Router Outdoor Obstructions (trees, lakes, buildings, RV's, hills, etc.) Type of building material (metal, aluminum, wood, sheetrock) Mounting position of antenna dbi Gain of the outdoor antenna Length of coax cable connected to the antenna Client device receive sensitivity, and transmit power The stronger the transmit power of the Wi Fi access point, the better your wireless signal will carry, and provide a more enjoyable Internet surfing experience for your customers.  The Transmit Power on typical Linksys, Dlink and Belkin Wireless Access Points/Routers,  is usually in the 15dbm range, or 32mW Transmit Power.  This means that connecting a high gain antenna will help your range, but will not provide the increased distance and signal strength that say a 200mW, or even 500mW Access Point will provide.  To get the best range from your outdoor antenna, please ask us about upgrading your Linksys or D-Link Access point to a higher power radio.

 

Electrical Specifications Frequency 2400-2500 MHz Gain 24 dBi Beam Width 8 degrees Polarization Horizontal or Vertical Front to Back Ratio 30 dB Impedance 50 Ohm Max. Input Power 50 Watts VSWR < 1.5:1 avg. Mechanical Specifications Weight 5.8 lbs. Grid Dimensions 40 in (100 cm) x 24 in (60 cm) Mounting 1.25 in. thru 2 in. (31.8 - 50.8 mm) diameter mast max. Elevation Angle 0 to +10 degrees RoHS Compliant Yes Operating Temperature -40° C to to 85° C (-40° F to 185° F)