This
Outdoor 12dbi Sector Antenna will make your
Wireless Installation easier and more secure.
The 180°
Design allows you to mount this Outdoor Antenna
on a Mast, or against a wall in order to
distribute the Wireless Signal up to 3 miles
away, at 180°.
For
the best results, this Outdoor 2.4GHz Sector
Antenna should be used in situations where you
have Line-of-Sight to the client locations.
Please
contact us if you have
questions about your setup, or need higher gain,
outdoor Antennas.
|
Please note:
Typical
Wireless Range will be dependent on the
following:
| |
- Transmit Power of your
Access Point or Wi Fi Router
- Outdoor Obstructions
(trees, lakes, buildings,
RV's, hills, etc.)
- Type of building
material (metal, aluminum,
wood, sheetrock)
- Mounting position of
antenna
- dbi Gain of the outdoor
antenna
- Length of coax cable
connected to the antenna
- Client device receive
sensitivity, and transmit
power
|
The stronger the transmit power of the
access point, the better your wireless
signal will carry, and provide a more
enjoyable Internet surfing experience
for your customers. The Transmit
Power on typical Linksys, Dlink and
Belkin Wireless Access Points/Routers,
is usually in the 15dbm range, or 32mW
Transmit Power. This means that
connecting a high gain antenna will help
your range, but will not provide the
increased distance and signal strength
that say a 200mW, or even 500mW Wi Fi Access
Point will provide. To get the
best range from your outdoor antenna,
please ask us about upgrading your Linksys or D-Link Access point.
|
|
Frequency Range |
2.4 -2.5 GHz |
|
Impedance |
50 W |
|
VSWR (or Return Loss) |
1.5:1 ( or 14dB) |
|
Gain |
12.6dBi |
|
Polarization |
Vertical, Linear |
|
3dB Horizontal Beam width |
180 degree |
|
3dB Vertical Beam width |
8 degree |
|
Size |
Length 40.5 " X Width 4.25 " |
|
Weight |
3 Lbs |
|
Connector |
N Female |
|
Wind Loading (Frontal) |
125 Mph/200
kmh |
|
Case Design |
Water Resistance, Outdoor |
|
Mounting Hardware |
Ring Clamp |
|
Front to Back Ratio |
22dB |
|
Max. Power Input |
20W |
|
Radome Material |
ASA with UV Protection |
|
Radome Color |
White |
|
Operating Temperature Range |
-49° to 167° F / -45 to +75 ° C |
|
Storage Temperature |
-22° to 167° F / -30 to +75 ° C |