Connect this 2.4GHz Outdoor Patch Antenna to any of your Indoor or Outdoor Wireless Access Points.  This 2.4GHz Antenna works great for connecting two locations wirelessly, sharing data, or using a VoIP wireless link.  With the included coax cable you will be able to connect this 2.4GHz antenna to any Linksys, Cisco, D-Link, Netgear, ZyXel or other Wireless Access Point for increased signal strength, and increased Wi Fi range.

 

Connect this antenna to your Linksys or D-link router, for increased wireless coverage.  Connect 2 buildings up to 1.5 miles away with this 13.5dBi antenna.  For added protection, add a Lightning Arrestor  that will fit inline with the cables provided, part# GNS-4000.

 

This package will connect to any device with a RP-SMAF, or RP-TNCF connector such as on the Cisco, Linksys, D-Link, Netgear, ZyXel, Belkin or other not listed.  To be sure your device will connect to this antenna package, please call us or identify your connector online.

 

If you are unsure if this will connect to your device, please contact us to be sure.

 

 

Please note:  Typical Wireless Range will be dependent on the following:   Transmit Power of your Access Point or Wi Fi Router Outdoor Obstructions (trees, lakes, buildings, RV's, hills, etc.) Type of building material (metal, aluminum, wood, sheetrock) Mounting position of antenna dBi Gain of the outdoor antenna Length of coax cable connected to the antenna Client device receive sensitivity, and transmit power The stronger the transmit power of the access point, the better your wireless signal will carry, and provide a more enjoyable Internet surfing experience for your customers.  The Transmit Power on typical Linksys, Dlink and Belkin Wireless Access Points/Routers,  is usually in the 15dbm range, or 32mW Transmit Power.  This means that connecting a high gain antenna will help your range, but will not provide the increased distance and signal strength that say a 200mW, or even 500mW Access Point will provide.  To get the best range from your outdoor antenna, please ask us about upgrading your Linksys or D-Link Access point.

 

 

 

Please note:  The Lightning Arrestor in the diagram is only optional, the cables in the package will still connect to each other without the Lightning Arrestor in place.