Connect this 2.4GHz Outdoor Directional Antenna
to any of your Outdoor Wireless Access
Points. This 2.4Ghz Antenna works great
for connecting two locations wirelessly, sharing
data, or using a VoIP wireless link. With
the appropriate coax cable (not included) you
will be able to connect this 2.4GHz antenna to
any Linksys, Cisco, D-Link, Netgear, ZyXel or
other Wireless Access Point for increased Wi Fi signal
strength.
Use this antenna if you would like to create a
Wireless Bridge between your two locations up to
3 miles apart, with great accuracy. If you
need to place your antenna more then 50ft. away
from the Access Point that you are deploying,
please view our
PoE adapters,
or use an
Outdoor Wi Fi Access Point.
|
Please note:
Typical
Wireless Range will be dependent on the
following:
| |
- Transmit Power of your
Access Point or Wi Fi Router
- Outdoor Obstructions
(trees, lakes, buildings,
RV's, hills, etc.)
- Type of building
material (metal, aluminum,
wood, sheetrock)
- Mounting position of
antenna
- dbi Gain of the outdoor
antenna
- Length of coax cable
connected to the antenna
- Client device receive
sensitivity, and transmit
power
|
The stronger the transmit power of the
access point, the better your wireless
signal will carry, and provide a more
enjoyable Internet surfing experience
for your customers. The Transmit
Power on typical Linksys, Dlink and
Belkin Wireless Access Points/Routers,
is usually in the 15dbm range, or 32mW
Transmit Power. This means that
connecting a high gain antenna will help
your range, but will not provide the
increased distance and signal strength
that say a 200mW, or even 500mW Access
Point will provide. To get the
best range from your outdoor antenna,
please ask us about upgrading your
Linksys or D-Link Wireless Access point.
|
 |
 |
