| |
|
|
|
ANTENNAS |
|
|
13dBi Outdoor 90-120 Degree
Sector Antenna,
2.4 GHz |
|
|

|
|
Part#: |
GNS-1427 |
|
Price: |
$229.99 |
Features:
Point
to Multipoint applications
120 Degree
Horizontal Coverage (2.4GHz)
40 Degree
Vertical Coverage
Near/Non
Line-of-Sight Design
NF
Connector
2.4GHz
Frequency
Mounting
Hardware Included (pole mount)
View
Extension cable for this Antenna
Download Spec. Sheet
|
|
The Ultra M Beam Antenna provides more power
and farther distance range for your wireless
network. This will outperform other extended
range antenna's. Offering
multi-polarization as well as geo-spatial
capture of signal, no other antenna can
match the variety of ways that Wi-Fi Plus has
created to capture the signal.
This antenna is the best antenna on the
market for 2.4GHz Non Line-of-Sight
transmission. Its obstruction penetrating
qualities will out perform circular,
diversity, fractal technologies.
As an optional antenna for your IEEE
802.11b, 802.11b+, and 802.11g 2.4GHz
Wireless Network equipments, it improves
signal strength/signal quality, reduces
noise and increases the coverage areas for
your Wireless Network Setup.
Advantages of
using Sector Antennas vs. Omni Antenna:
-
More Clients:
By using 3 sectors with 3 Access Points,
you can triple the number of clients in
a given area. This increases range,
reduces latency, and speeds up network
efficiency.
-
Better signal
levels: Sector antennas
usually have more gain than Omni's. This
results in fewer retries and less
packets lost. By focusing
the signal in the desired area, you
increase signal strength.
-
Eliminate
interference: Because a sector
antenna is directional and usually has
good front-to-back (F/B) ratio, it can
reduce or eliminate interference from
sources that are behind the sector
antenna. You also eliminate
overshooting your clients, which will
happen when mounting an Omni antenna too
high above the client.
-
Channel Re-Use
- Because the sector antenna can be down
tilted, mechanically 3, 6, or 8 degrees,
the signals are not thrown out to the
horizon. This allows that same channel
to be re-used several miles away at a
different cell site, without
overlapping. You can also have 3
separate antennas configured to use 3
separate channels, 1, 6 and 11
simultaneously.
Designed for wireless Point-to-Multipoint
Bridging Applications, or Wireless Hotspot
setups, this Non Line-of-Sight (NLOS) Sector
Antenna will create excellent coverage for
your Wireless Network. Constructed of
stainless steel and protected by a radome
this high quality antenna will provide
countless years of service for your Wireless
Connection.
|
Please note:
Typical
Wireless Range will be dependent on the
following:
| |
- Transmit Power of your
Access Point or Wi Fi Router
- Outdoor Obstructions
(trees, lakes, buildings,
RV's, hills, etc.)
- Type of building
material (metal, aluminum,
wood, sheetrock)
- Mounting position of
antenna
- dBi Gain of the outdoor
antenna
- Length of coax cable
connected to the antenna
- Client device receive
sensitivity, and transmit
power
|
The stronger the transmit power of the
access point, the better your wireless
signal will carry, and provide a more
enjoyable Internet surfing experience
for your customers. The Transmit
Power on typical Linksys, Dlink and
Belkin Wireless Access Points/Routers,
is usually in the 15dbm range, or 32mW
Transmit Power. This means that
connecting a high gain antenna will help
your range, but will not provide the
increased distance and signal strength
that say a 200mW, or even 500mW Access
Point will provide. To get the
best range from your outdoor antenna,
please ask us about upgrading your
Linksys or D-Link Access point.
|
|

|
|
RELATED PRODUCTS
|
 |
Teletronics TT2400
Outdoor AP/Bridge 54Mbps
2.4GHz, 802.11b/g
200mW Output Power
Part #: TT2400
Price: $259.99 Click
for More Info.
|
|
|
|
|
|
 |
Indoor 1000mw Amp
Includes Power Supply
802.11b/g (NF Conn.)
Part#: GNS-1460
Price: $299.99 Click
for More Info.
|
|
 |
|
|
|
|
|