|
This Indoor 500mw 802.11g amplifier is designed for 802.11g
Wireless Network Installations. Designed for extending the
range of 2.4GHz Wireless Radio devices, the SmartAmp is
particularly effective when used with Direct Sequence or
Frequency Hopping Spread Spectrum radio modems. This
Indoor unit provides transmit power amplification and receives
signal gain.
The small profile design of this Indoor 802.11g amplifier
provides the transmit power amplification as well as receive
signal gain you are looking for in your Wireless Network
Installation, all with only 3.5dBm RX noise increase.
If you are unsure if this amplifier will work in your Wireless
Network Installation, please
contact us to discuss.
Please review and obey all FCC part 15 rules and regulations
with regards to installation of WiFi amplifiers. Only
network professionals should be installing 802.11 network
amplifiers.
Technical Specifications
|
|
Frequency Range:
|
2400 - 2500 MHz |
|
Operating Mode: |
Bi-directional, half duplex, auto-switching
|
|
Connector: |
Antenna Out: RPSMA
Antenna In: SMA from the
radio |
|
Frequency Response:
|
+/- 1dB over
operating mode |
|
Input Power:
|
6mW (Min),
100mW (Max) |
|
Output Power:
|
500mW
(27dBm) |
|
Transmit Gain:
|
14dBm |
|
Receive Gain:
|
14dBm |
|
Receive Noise Figure: |
3.5dBm
nominal |
|
Mechanical Specifications |
|
Operating Temperature: |
-20 °C to +
70 °C |
|
Operating Humidity:
|
up to 95%
relative humidity |
|
Power Adapter:
|
6V DC Max
Current
<1A, 100~240V AC |
|
Dimensions: |
Amplifier:
3.0 x 2.2 x .90 inches
(7.8 x 5.6 x 2.3 cm)
DC Adaptor: 2.5 x 1.8 x 1.1 inches
(6.0 x 4.4 x 2.5cm) |
|
Weight: |
Amplifier:
<0.5lb/ 200g
DC Adaptor: <120 g |
|
|
Includes
Amplifier, DC Injector and PS
GNS-1440
