Features:
Includes Amplifier, PoE adapter and PS

NF Connectors

Operating Range: 2400-2500 MHz

Up to 30 dBm Transmit Gain

Up to 20 dBm Receive Gain

This Outdoor 1 watt Power over Ethernet, PoE,  802.11b/g amplifier is designed for 802.11b/g Wireless Network Installations.  Designed for extending the range of 2.4GHz Wireless Radio devices, the outdoor PoE amplifier is particularly effective when used with Direct Sequence or Frequency Hopping Spread Spectrum radio modems.  This Outdoor unit provides transmit power amplification and receives signal gain.

By using the integrated PoE feature of this amplifier, you will be able to mount your Access Point outdoor, and connect an amplifier inline with an updated PoE device.  The cat5 cable will connect from your PoE unit located indoors, and connect to the amplifier.  You will then connect the cat5 cable from the amplifier to the outdoor access point.  From the access point, a short coax cable will connect the RF output NF connector to the NF connector on the amplifier.  You will then connect the outgoing RF connector on the amplifier to the High gain antenna.  This will not only increase your transmist power, but also increase your receive sensitivity for the access point.  For users that are on the brink of connecting to your access point, an outdoor amplifier is what you need.

Applications:

Full output power of 1 Watt  is achieved with only 5mW input to the amplifier.  Above 5mW input, the SmartAmp attenuates the input signal power and maintains the output power typically at 1 Watt.

If you are unsure if this amplifier will work in your Wireless Network Installation, please contact us to discuss.

Please review and obey all FCC part 15 rules and regulations with regards to installation of WiFi amplifiers.  Only network professionals should be installing 802.11 network amplifiers.

Simple Diagram of installation located below: