|
This Outdoor 1 watt Power over Ethernet, PoE, 802.11a amplifier is designed for 802.11a
Wireless Network Installations. Designed for extending the
range of 2.4GHz Wireless Radio devices, the outdoor PoE
amplifier is
particularly effective when used with Direct Sequence or
Frequency Hopping Spread Spectrum radio modems. This
Outdoor unit provides transmit power amplification and receives
signal gain.
By using the integrated PoE feature of this amplifier, you will
be able to mount your Access Point outdoor, and connect an
amplifier inline with an updated PoE device. The cat5
cable will connect from your PoE unit located indoors, and
connect to the amplifier. You will then connect the cat5
cable from the amplifier to the outdoor access point. From
the access point, a short coax cable will connect the RF output
NF connector to the NF connector on the amplifier. You
will then connect the outgoing RF connector on the amplifier to
the High gain antenna. This will not only increase your
transmit power, but also increase your receive sensitivity for
the access point. For users that are on the brink of
connecting to your access point, an outdoor amplifier is what
you need.
Included with this outdoor PoE 1 Watt Amplifier is a 48V,60W POE
POWER SUPPLY, WITH SURGE & AC CORD.
This PoE will replace the PoE currently used by your existing
outdoor access point.
Applications:
- 5GHz Wireless Network Systems
- High Cable Loss Installations
- Harsh Environment Installations
- Tower Top or Enclosed Installations
- Point to Point or Wi Fi Hot Spot Installations
Full output power of 1 Watt is achieved with only 5mW input to
the amplifier. Above 5mW input, the SmartAmp attenuates
the input signal power and maintains the output power typically
at 1 Watt.
If you are unsure if this amplifier will work in your Wireless
Network Installation, please
contact us to discuss.
Please review and obey all FCC part 15 rules and regulations
with regards to installation of WiFi amplifiers. Only
network professionals should be installing 802.11 network
amplifiers.
Simple Diagram of installation located below:
|
Technical
Specifications
|
|
Features: |
802.11a 1W Outdoor |
|
Operating Range: |
5.725 - 5.825 GHz |
|
Operating Mode: |
Bi-directional,
TDD |
|
Transmit Gain*: |
1W (+30) dBm |
|
Frequency Response: |
± 1 dB |
|
Output Power: |
1W (+ 30 dBm) |
|
TX Input Power: |
10 dBm |
|
Receiver Gain: |
15 dB typical |
|
Noise Figure: |
3.5 dB typical |
|
Connectors: |
N-type, female, 50 Ohm |
|
Lightning Protection: |
Quarter Wave
Technology DC Short |
|
DC Surge Protection: |
500W Surge
Protection |
|
Weight: |
< 3.7lbs. |
|
Operating Temperature: |
-40 °C to + 70
°C |
|
|
Includes
Amplifier, PoE adapter and PS
GNS-1451
