|
 |
|
Part#: |
GNS-1461 |
|
Price: |
CALL |
Features:
 Includes
Outdoor amplifier, power supply
and Power
injector.
NF
Connectors
Operating
Range: 2400-2500 MHz
Adds up
to 30dbm output power
Up to 12
dB Receive Gain
1 Watt
Smart Amplifier (2.4 GHz)
Utilizes
Power Over Ethernet (POE)
|
|
Please Note: This amplifier is only
available for Military or Export only. Please call for
more information, or view the Pro-Wav pre-packaged solutions
below:
|
 |
Pro-WAV PWK-1
Board Mounted Range
Extender Kit. Includes Shock-
WAV
Wi-Fi Signal Booster and
Circular Polarized Antenna.
Part #: PWK1-24-FC2
Price: $494.95
 Click
for More Info.
|
|
|
|
|
|
 |
Pro-WAV PWK-2
Range Extender Kit. Includes
Shock-WAV Wi-Fi Booster
and
dipole Omni antenna.
Part #: PWK2-24-FC2
Price: $419.95
Click
for More Info. |
|
|
|
|
|
 |
Pro-WAV PWK-6
Outdoor Range Extender or
Bridge
Kit (requires 2 kits) to
reach
outdoor areas.
Part #: PWK6-24-FC2
Price: $524.95
Click
for More Info. |
|
|
|
|
|
This Indoor 1000mw 802.11b/g amplifier is designed for 802.11b/g
Wireless Network Installations. Designed for extending the
range of 2.4GHz Wireless Radio devices, the Luxul amplifiers are
particularly effective when used with outdoor antennas. This
Indoor unit provides transmit power amplification and receives
signal gain.
Luxul combines this amplifier with its patent pending Power Over
Coax power injector. This injector gives you complete
flexibility on amplifier placement by having the ability to
place the amplifier directly near a power source, or remotely
and use the included power over Ethernet. Use an amplifier
to increase signal strength at your point to point wireless
network installation.
Adding an amplifier to your wireless network will reduce ambient
noise in the area, as well as provide increased signal
penetration. Amplifiers are recommended for installations
where you will be communicating directly to laptop users, where
your customers are using weaker transmit devices such as PDA's,
laptop cards, or other small wireless devices.
If you are unsure if this amplifier will work in your Wireless
Network Installation, please
contact us to discuss.
Please review and obey all FCC part 15 rules and regulations
with regards to installation of WiFi amplifiers. Only
network professionals should be installing 802.11 network
amplifiers.
Call (516) 214-0321 for more
information.
| Now you can have Luxul quality in a 802.11 b/g
amplifier! Offering “g” speeds with the ease of
Power Over Ethernet, this amplifier is the optimal
solution for your 802.11 b/g needs. |
| |
| Specifications: |
| Power Output: 1 Watt |
| Environment: Outdoor |
| Operating Range: 2400 - 2500 MHz |
| TX Input Range: +10 dBm - +24 dBm |
| Noise Figure: <3 dB |
| Connectors: N female |
| Power Requirements: 12-48V 5W (Typical) |
| Dimensions: 3.75" x 3" x 1.25" |
| Operating Temp: - 40o F to +150o F |
| Reduces ambient noise and provides superior
signal penetration |
| Adds Up to 30 dBm output power |
| All amplifiers come with power supply |
| Solid Aluminum construction |
| LEDs for power, transmit and receive |
| Power Over Ethernet Pass-Through Port |
| Patent Pending |
| |
| Injector
Specifications: |
| Environment: Indoor |
| Connectors: N female |
| Power Requirements: 12-48V 5W (Typical) |
| Power Options: Power-Over-Ethernet (POE), Direct
DC , 802.3af |
| Dimensions: 3.25" x 2.5" x 1.125" |
| Operating Temp: - 40o F to +150o F |
| Solid Aluminum construction |
| LEDs for power |
| Power Over Ethernet Pass-Through Port
TROUBLESHOOTING
1. Make sure the cables are properly
connected and that there is power to the Shock-WAV
Wi-Fi Signal Booster (or POE injector if applicable)
and the WAP.
2. Sometimes, WAP’s with multiple
antennas have primary and secondary antennas.
The secondary antennas often do not receive or
transmit with the same amount of power as the
primary. If your WAP has more than one port, try
connecting to a different port.
3. While Luxul products work with
almost every commercially available WAP, some
low-cost products do not offer the same results as
higher-end models.
4. Ensure that the antenna is
properly positioned. If it is facing away from the
desired coverage area, or there are many obstacles
in the way, wireless coverage may be incomplete. For
best results use a Luxul Wireless X-WAV antenna.
X-WAV signals are superior for penetrating wood,
concrete, and stucco, but all wireless signals can
be disrupted by certain obstructions, including
large metal objects. Try orienting the antenna where
more line-of-sight access to the desired coverage
area is available.
5. If after checking the above
items, your X-WAV antenna still does not seem to be
functioning properly, please contact us at
support@gnswireless.com.
|
|
