|
This Outdoor 15dbi
Integrated CPE Device can be mounted outdoors, and can be powered through
the integrated Power-over-Ethernet adapter that comes with the
unit. This means that this client device can be
placed up to 300ft. away from your network, with only a single
cat5 cable connecting to it. This makes your network
Installation easier to install and maintain.
This unit can also be
purchased with an N-Type Connector for use with external antenna
for increased range. Call for details, (516)
214-0321.
Features at a
glance
-
Station Adapter
Mode
-
Power over
Ethernet (PoE)
-
Multiple MAC
Bridge Support
-
DHCP Client
-
128bit WEP
-
Web Management
-
15dB Integrated
Panel Antenna
-
Outdoor CAT5
Connector
-
Higher 23dB
(200mW) Output
-
Higher Receive
Sensitivity (-89dB @ 11mbps)
-
Transient
Discharge Protection (Tested to 2200 volts)
-
HTML interface
-
High Output LED's
-
Remote Management
and Remote Update Capability
-
Signal and Noise
levels in dBm
-
Adjustable RTS/CTS
settings
-
Requires only 5.5
Watts of Power
Technical Specs.
|
Standard |
IEEE 802.11b |
|
Data Rates Supported |
1, 2, 5.5 and 11 Mbps |
|
LAN Interface |
10BaseT Ethernet |
|
Frequency Band |
2.4ghz to 2.5ghz |
|
Radio Mode |
Station Adapter Infrastructure |
|
Communication Method |
Half Duplex |
|
Transmit Power |
+36dBm EIRP |
|
Operating Channels |
11 FCC |
|
Receive Sensitivity |
-89dBm
@ 11mbps |
|
Range |
Up to 3+ miles Point-to-Point |
|
Polarization |
Horizontal or Vertical |
|
Antenna Beamwidth |
20 Degree Horizontal, 33 Degree Vertical |
|
Encryption |
40-bit & 128-bit WEP |
|
Remote Configuration Support |
Based on IP Address |
|
Dimension |
(L x W) 13 x 10 |
|
Unit Weight |
0.55 kg (2.09 lbs) |
|
Environmental Operating Temperature |
-65 deg C ) to +70 deg C |
|
Mounting |
Pole or wall mount via 2 pc U-Bolts & clamps
(included) |
|
Cable |
100 meter maximum cat5 cable |
Specifications are subject to change without
notice.
Subject to local regulations.
|