|
This Outdoor NF Integrated
AP/CPE Device can be mounted outdoors, and can be powered through
the integrated Power-over-Ethernet adapter that comes with the
unit. This means that this client device can be
placed up to 300ft. away from your network, with only a single
cat5 cable connecting to it. This makes your network
Installation easier to install and maintain.
This unit can also be
purchased with an integrated antenna for increased range. Call for details, (516)
214-0321.
Features at a
glance
-
Station Adapter
Mode
-
Power over
Ethernet (PoE)
-
Multiple MAC
Bridge Support
-
DHCP Client
-
128bit WEP
-
Web Management
-
NF Antenna
Connector
-
Outdoor CAT5
Connector
-
Higher 23dB
(200mW) Output
-
Higher Receive
Sensitivity (-89dB @ 11mbps)
-
Transient
Discharge Protection (Tested to 2200 volts)
-
HTML interface
-
High Output LED's
-
Remote Management
and Remote Update Capability
-
Signal and Noise
levels in dBm
-
Adjustable RTS/CTS
settings
-
Requires only 5.5
Watts of Power
Technical Specs.
|
Standard |
IEEE 802.11a |
|
Data Rates Supported |
1, 2, 5.5, 11, 54 Mbps |
|
LAN Interface |
10/100BaseT Ethernet |
|
Frequency Band |
5Ghz |
|
Radio Mode |
Station Adapter Infrastructure |
|
Communication Method |
Half Duplex |
|
Transmit Power |
+36dBm EIRP |
|
Operating Channels |
11 FCC |
|
Receive Sensitivity |
-89dBm
@ 11mbps |
|
Range |
Up to 3+ miles Point-to-Point |
|
Polarization |
Horizontal or Vertical |
|
Antenna Beamwidth |
NF Connector |
|
Encryption |
40-bit & 128-bit WEP |
|
Remote Configuration Support |
Based on IP Address |
|
Dimension |
(L x W) 13 x 10 |
|
Unit Weight |
0.55 kg (2.09 lbs) |
|
Environmental Operating Temperature |
-65 deg C ) to +70 deg C |
|
Mounting |
Pole or wall mount via 2 pc U-Bolts & clamps
(included) |
|
Cable |
100 meter maximum cat5 cable |
Specifications are subject to change without
notice.
Subject to local regulations.
|