This outdoor, 500mW, High Power, Access
Point or Client
device features even more power than
the standard outdoor devices. The
GNS-1661 is ideal for locations that are
short to medium
distance or are located in a remote
installation environment. The AP/CPE includes an
integrated 12dbi antenna, so the
professional WISP installer can choose the
best location to mount the CPE.
This Outdoor CPE
has Web configuration pages, an SSH CLI, and
is also SNMP enabled. Firmware upgrades can
also be performed over the air* through the
web interface. In addition, the high output
power with RSSI indication allows longer
shots to be made easily. The Power over Ethernet feature,
makes installation a breeze for any
technician. The LEDs on the radio give a
quick indication that the radio is powered
and functioning properly.
This Outdoor Access Point is highly
recommended for use in Marine, RV-Park, Golf
Resorts, Campground, and Hotel Applications.
The high output power means easier and
faster Wireless Internet Access for your
guests.
Contact us today
to setup a quote for your situation.
If you are planning a Point to Point
Bridging application where you will be
connecting two or more locations together
wirelessly, then please look at our
outdoor access points,
which will adapt seamlessly to this Outdoor
CPE. Choose an AP that
has enough gain to reach your remote
location. This High powered Outdoor
CPE will do the rest. For
Point to Multipoint configurations, please
click here
for pre-packaged antenna configurations.
|
This Wi-Fi Access Point can be
mounted directly outdoors, and is housed in a
weatherproof enclosure. This makes
installation easier, as the small size, 6" x 4"
makes it easy to place under an eve. The Wi-Fi
Antenna is built into the outdoor enclosure, and is
able to broadcast a signal up to 500ft., with no
obstructions. Connect this access point to
your indoor router, with only a single cat5 Ethernet Cable,
shown below.
In picture shown to the right,
you will see the rear view of the radio, displaying
the L-Bracket, and included hardware allowing you to
mount directly to a mast up to 2" in diameter.
If you are mounting the radio's
to a flat surface, such as the side of a home or
building, it is recommended that you use the
GNS-1433, Universal Antenna Mount.
Click here for more info. |
Enclosure Rear View
 |
|
-
Adjustable RF Output Power
-
12dbi Integrated Antenna
-
PoE for Single-cable Installation
-
Built-in Ethernet Surge protection
-
802.11b/g Compliant
-
Software Configurable Modes
-
Multiple Management Technologies
-
Web GUI
-
SSH
-
SNMP
-
Discovery Tool
-
Up to date Security Technology
-
Watertight and weatherproof design
-
VoIP friendly QoS
-
Bandwidth management
-
IP ToS
Use in AP MODE when
BROADCASTING A SIGNAL:
Use in CLIENT MODE when
RECEIVING A SIGNAL:
500mw
@ 11mbps Output Power
GNS-1661
