500mW, weatherproof access point, increase wi-fi signal strength, increase wireless network range, 802.11a, 802.11b, 802.11g, gnswireless, Outdoor CPE, poe injector, 12dbi integrated wi-fi antenna, weatherproof RJ45

2.4GHz Weatherproof Access Point

2.4GHz 500mW Access point with a integrated 15dBi patch antenna. The access point is sealed in a weatherproof, outdoor enclosure for ease of installation, and required only a single cat5 Ethernet cable for both power and data.

500mW Outdoor Wireless Access Point

Part#:	GNS-1661
Price:	$199.99

Features:
500mw @ 11Mbps Output Power

-84dbm@11Mbps receive sensitivity

-75dbm@11Mbps receive sensitivity

AP and AP Client Modes

WDS for Inter-AP Bridging

Various Antenna Configurations

2.4GHz 802.11b/g Frequency

Mounting Bracket, PoE adapter and

Power Supply included.

Small Enclosure

In StockGNS-1661Contact Us to Buy

This outdoor, 500mW, High Power, Access Point or Client device features even more power than the standard outdoor devices. The GNS-1661 is ideal for locations that are short to medium distance or are located in a remote installation environment. The AP/CPE includes an integrated 12dBi antenna, so the professional WISP installer can choose the best location to mount the CPE.

This Outdoor CPE has Web configuration pages, an SSH CLI, and is also SNMP enabled. Firmware upgrades can also be performed over the air* through the web interface. In addition, the high output power with RSSI indication allows longer shots to be made easily. The Power over Ethernet feature, makes installation a breeze for any technician. The LEDs on the radio give a quick indication that the radio is powered and functioning properly.

This Outdoor Access Point is highly recommended for use in Marine, RV-Park, Golf Resorts, Campground, and Hotel Applications. The high output power means easier and faster Wireless Internet Access for your guests. Contact us today to setup a quote for your situation.

If you are planning a Point to Point Bridging application where you will be connecting two or more locations together wirelessly, then please look at our outdoor access points, which will adapt seamlessly to this Outdoor CPE. Choose an AP that has enough gain to reach your remote location. This High powered Outdoor CPE will do the rest. For Point to Multipoint configurations, please click here for pre-packaged antenna configurations.

This Wi-Fi Access Point can be mounted directly outdoors, and is housed in a weatherproof enclosure. This makes installation easier, as the small size, 6" x 4" makes it easy to place under an eve. The Wi-Fi Antenna is built into the outdoor enclosure, and is able to broadcast a signal up to 500ft., with no obstructions. Connect this access point to your indoor router, with only a single cat5 Ethernet Cable, shown below.

In picture shown to the right, you will see the rear view of the radio, displaying the L-Bracket, and included hardware allowing you to mount directly to a mast up to 2" in diameter.

If you are mounting the radio's to a flat surface, such as the side of a home or building, it is recommended that you use the GNS-1433, Universal Antenna Mount. Click here for more info.

Enclosure Rear View

500mW Wireless AP

Adjustable RF Output Power
15dBi Integrated Antenna
PoE for Single-cable Installation
Built-in Ethernet Surge protection
802.11b/g Compliant
Software Configurable Modes
- Access Point
- AP Client
- AP Router
- Universal Repeater
- AP Client Router (WISP mode)
Multiple Management Technologies
- Web GUI
- SSH
- SNMP
- Discovery Tool
Up to date Security Technology
- 64 and 128bit WEP
- WPA Personal and WPA Enterprise with TKIP and / or AES
- WPA2 / 802.11i
Watertight and weatherproof design
- IP66/67
VoIP friendly QoS
- Bandwidth management
- IP ToS

PLEASE NOTE: The router is not included and is for illustration purposes only.

point to multi-point diagram, point to point, outdoor wireless internet, outdoor long range wif-fi, wifi

GNS Wireless Network Diagram