500mW, Outdoor CPE, weatherproof access point, poe injector, 12dbi high gain integrated antenna, increase range wi-fi, broadcast outdoor wi-fi, wifi, gnswireless

5GHz Weatherproof Access Point

5GHz 500mW Access point with a integrated 15dBi patch antenna. The access point is sealed in a weatherproof, outdoor enclosure for ease of installation, and required only a single cat5 Ethernet cable for both power and data.

500mW Outdoor Wireless Access Point

Part#:	GNS-1691
Price:	$229.99

Features:
500mw @ 11Mbps Output Power

-84dbm@11Mbps receive sensitivity

-75dbm@11Mbps receive sensitivity

AP and AP Client Modes

WDS for Inter-AP Bridging

Various Antenna Configurations

5GHz 802.11a Frequency

Mounting Bracket, PoE adapter and

Power Supply included.

In StockGNS-1691Contact Us to Buy

This outdoor, 500mW, High Power, Access Point or Client device features even more power than the standard outdoor devices. The GNS-1691 is ideal for locations that are short to medium distance or are located in a remote installation environment. The AP/CPE includes an integrated patch antenna, so the installer can determine the best outdoor Wi-Fi Antenna to connect to the device, and have up to 250ft. to connect it back to the network.

This Outdoor CPE has Web configuration pages, an SSH CLI, and is also SNMP enabled. Firmware upgrades can also be performed over the air* through the web interface. In addition, the high output power with RSSI indication allows longer shots to be made easily. The Power over Ethernet feature, makes installation a breeze for any technician. The LEDs on the radio give a quick indication that the radio is powered and functioning properly.

This Outdoor Access Point is highly recommended for use when connecting multiple locations, and you want to avoid the crowded 2.4GHz wireless networks. Contact us today to setup a quote for your situation.

This Wi-Fi Access Point can be mounted directly outdoors, and is housed in a weatherproof enclosure. This makes installation easier, as the small size, 6" x 4" makes it easy to place under an eve. The Wi-Fi Antenna is built into the outdoor enclosure, and is able to broadcast a signal up to 500ft., with no obstructions. Connect this access point to your indoor router, with only a single cat5 Ethernet Cable, shown below.

In picture shown to the right, you will see the rear view of the radio, displaying the L-Bracket, and included hardware allowing you to mount directly to a mast up to 2" in diameter.

If you are mounting the radio's to a flat surface, such as the side of a home or building, it is recommended that you use the GNS-1433, Universal Antenna Mount. Click here for more info.

Enclosure Rear View

Adjustable RF Output Power
15dBi Integrated Antenna
PoE for Single-cable Installation
Built-in Ethernet Surge protection
802.11a Compliant
Software Configurable Modes
- Access Point
- AP Client
- AP Router
- Universal Repeater
- AP Client Router (WISP mode)
Multiple Management Technologies
- Web GUI
- SSH
- SNMP
- Discovery Tool
Up to date Security Technology
- 64 and 128bit WEP
- WPA Personal and WPA Enterprise with TKIP and / or AES
- WPA2 / 802.11i
Watertight and weatherproof design
- IP66/67
VoIP friendly QoS
- Bandwidth management
- IP ToS

Use in AP MODE when BROADCASTING A SIGNAL:

Use in CLIENT MODE when RECEIVING A SIGNAL: