|
Connect your two locations up to 1000ft. apart, using this easy
to install wireless bridge kit. The antennas are 12dBi
gain, directional antennas. Each antenna has 40 degrees
of coverage, in one direction.
Just point the antenna in the opposite direction, connect it to
the D-Link DWL-2100AP, and you'll be connected in no
time. D-Link DWL-2100AP's come with latest in WPA encryption, MAC address
filtering and WEP encryption. Online Web Configuration
lets your configure these Access Points in one of 5 modes.
Antennas are a 12dBi gain, directional antenna, that are
non-obtrusive and easy to mount. With these antennas, you
will be able to connect any two locations together. Share
files, Internet access, video, music or any other files.
These 12dBi Antennas come with a set of mounting brackets that
allow for easy tilting operation for angled installations. For
better signal strength, and more reliable throughput, ask us about
upgrading this Wireless Bridge Kit to use the
DWL-2200AP's.
If your Access Point is not in an ideal position in order to meet the 30
foot cable requirement, please take a look at our
Power-over-Ethernet adapters, (POE).
Lightning Arrestors:
When using outdoor antenna installations, it
is always possible that an antenna will suffer damage from
potential charges developing on the antenna and cable, or surges
induced from nearby lightning strikes.
The 2.4GHz Lighting Protector that is
Included in all of our Wireless Bridge packages will provide
protection to 2.4 GHz radio equipment from static electricity
and lightning-induced surges that travel on coaxial
transmission lines. This system needs to be
properly grounded as identified in the hardware installation
manuals of the products. For grounding hardware, please
click here.
Note: These antennas
require Line-of-Sight to each other in order to establish a
secure, reliable connection. If you have LOS issues, then check
out our NLOS (Non
Line-of-Sight) packages.
|
Two
Outdoor 12dBi Patch Antennas
GNS-1801
