|
 |
|
Part#: |
GNS-1820 |
|
Price: |
Call for Pricing |
This Wireless Bridge kit
includes Two Outdoor Access
Points, as well as 100ft. of cat5 network cable.
Features:
AES
ENCRYPTED WIRELESS BRIDGE!
Integrated
24db Internal Antenna
FULL
DUPLEX! 54mbps Throughput!
Weather
Proof Enclosure
Carrier
Class QOS with Low Latency
54mbps
Transfer Rate
Integrated
PoE Adapter
Dual
Ethernet Ports
100ft. of
cat5 network cable included
Great
for VoIP Applications
and Streaming
Video.
Technical
Specs.
|
|
This Wireless Bridge is a low latency wireless link, that will
provide a seamless connection between your two locations.
Low latency is required when VoIP or Video is being streamed
across the wireless link. For a low latency connection,
total packet delivery time needs to be 100ms or less. For
voice applications, low jitter is also important. Jitter
is the variation in latency, or the difference between the
fastest and slowest packet response times. This wireless
link, will have both qualities, and assuming LOS can connect
your locations up to 2 miles. Contact us for more
information.
Unlike
traditional single radio solutions, where a single radio
performs both transmitting and receiving in sequence,
this high performance wireless system utilizes two
radios, allowing data to flow in both
directions at the same time. This is the
equivalent to traffic moving on a two lane highway,
compared to a single lane road. Traffic is able to
move much faster when it is able to flow in both
directions. This wireless bridge has the ability
to send data, and receive data at the same time,
increasing the speed of your connection with a lower
latency.
The unique design of this product allows for the use of
interchangeable filters to adjust the units operation to
meet changing needs and demands. With at least 65 Db of
adjacent channel rejection, multiple radios can be
collocated without an impact on performance. These
units support operation in 5, 10 and 20 MHz wide
channels. Unlike some other solutions, the radio's
filtering matches the channel size, meaning that the
radio will only listen to the channels you specify.
Combined with Tranzeo's proven simple to install
mounting system, and alignment LED's visible on full
sunlight, this fully integrated unit offers a rugged,
powerful solution at price that anyone can afford. |
This Wireless Bridge
is connecting at a frequency above 5Ghz, which means if you have
small trees or other small obstacles in the path of your Point-to-Point
connection, you will still have a strong and solid connection.
Simply mount the enclosure outside in the direction of your
remote location, connect the cat5 network cable to your LAN, and
your ready for connectivity.
|
 |
For additional protection from
surges, or other surge induced electricity that
may travel through the Ethernet
cable, please use the 300SS
surge protector.
Indoor/Outdoor Canopy
Surge Protector
Part#: 300SSB
Price: $32.99 |
|
Features at a
glance
-
Dual Ethernet
Ports: This will allow you to daisy chain radios
at your installation sites. This can benefit you as an
installer, as the dual Ethernet ports will allow you to plug
in PoE devices such as network cameras or other Outdoor
Access Points.
-
More Robost
Routing Features: Includes Tunneling Protocol
Support, which will allow you to pass through VPN clients,
as well as use tunneling protocols such as VPN, PPTP, RSA
and others.
-
All New Access
Point Features: WDS will allow this Outdoor Access
Point to be wirelessly connected to other Access Points,
while still servicing clients. (Wireless Distribution
System)
-
Wi-Fi
Protected Access (WPA): Wireless Protected Access
improves on the security features of WEP. It includes
improved data encryption and user authentication, and AES
Encryption.
-
All New Client
Adapter Features: With this Outdoor Access Point,
you will be able to align your client and point-to-point
installations without having to log into the radio.
You will get visual signal strength at a glance by using
this great new feature, using the alignment LED's located on
the back of the Access Point.
-
Controllable
High Gain Output: Both radios have 13dBm maximum
output. This works great for long distance
Point-to-Point applications, as well as Client applications.
Power can be scaled back for closer installations to avoid
noise issues and to meet local regulatory requirements.
-
Wireless
Security: WEP, WPA wireless security is included
in this wireless backhaul. This will encrypt the data
being sent between the connection. Also included in
this wireless backhaul is AES encryption, which is a higher
level security feature then standard WEP/WPA. The two
radios can also be configured in PXP mode, which enables
only the two outdoor access points to communicate with each
other, avoiding any other access to the network. The
wireless bridge operates seamlessly as a Wireless Bridge
between your two locations.
Technical Specs.
|
Standard |
IEEE 802.11a |
|
Data Rates Supported |
54, 11 Mbps, 5.5 Mbps CCK, 2 Mbps DQPSK, 1
Mbps |
|
LAN Interface |
10/100 BaseT Ethernet |
|
Frequency Band |
5.7Ghz
&
5.8Ghz |
|
Radio Mode |
Point-to-Point Bridge |
|
Communication Method |
Full Duplex |
|
Transmit Power |
+23dBm Maximum |
|
Channel Size |
5, 10 and 20 MHz |
|
Receive Sensitivity |
-Adaptive |
|
Protocol Supported |
TCP/IP |
|
Polarization |
Horizontal or Vertical |
|
Antenna Beamwidth |
8.7 Degree Horizontal, 7.7 Degree Vertical |
|
Encryption |
40-bit & 128-bit WEP,
MAC filter, WPA, AES Encryption |
|
Remote Configuration Support |
Based on IP Address |
|
Dimension |
(L x W) "13 x 10 radio only" |
|
Unit Weight |
(~3.09 lbs) |
|
Environmental Operating Temperature |
-65 deg C to +60 deg C |
|
Mounting |
Pole or wall mount via 2 pc U-Bolts & clamps
(included) |
|
Power Consumption |
350 mA at 12V DC |
|
Cable |
100 meter maximum cat5 cable |
Specifications are subject to change without
notice.
Subject to local regulations.
|