The EZLoop® VoIP FXS2 Adapter is a two-port telephone adapter with a four port Switch/Hub.

The EZLoop® VoIP FXS2 provides Data transfer by 10Mbps, telephone services and T.38 fax over IP network.

The EZLoop® VoIP FXS2 is most suitable for SOHO and/or a small-to-medium Internet communication environment.
 

Features

Easy access to IP from phone set or PBX

Cost Saving - Telephone call from VPN or public Internet

Follows the existing telephone call dial plan

Easy interface to ADSL/Cable Modem or Leased line equipment

 

Software Specifications
Protocol Supported	ITU-T H.323 v2/v3/v4 compliance SIP RFC3261
Supplementary Service	H.450 (Call Hold, Call Transfer, Call Forward)
FAX Support	Automatic FAX detection Group 3 Fax relay at 2.4 - 14.4 kbps Support T.38 protocol
Codec Supported	G.711A/u-law, G.723.1, G.729, G.729A, G.729B, G.729AB
Voice Quality	VAD (Voice Activity Detection) CNG (Comfort Noise Generation) G.165/G.168 compliant echo cancellation Programmable Dynamic Jitter Buffer Bad Frame Interpolation Provide both in-band and out of band DTMF generation detection Gain/Attenuation Settings Provide progress tone: Dial Tone, Busy Tone, 2nd Dial Tone, Call-Holding Tone and Ring-Back Tone
QoS	TOS
Caller ID	Generation (FSK/DTMF)
Tone	DTMF/CPT (Call Progress Tone) Generation/Detection
ADSL Environment	PPPoE
Firewall Environment	Behind NAT Router or IP sharing device
Security	Support H.235 security function
Configuration & Management	Console port, TELNET and Web Browser
Upgrade	Firmware upgrade through network by TFTP/FTP

 

Mechanical Specifications
Power	Input AC 100V~240V Output DC12V
Operation Temperature	41 ~ 104°F (5 ~ 40°C)
Humidity	10% to 90% (Non-condensing)
Console Interface	One DB-9 RS-232 COM port
Network Interface	Two 10/100Base-T Ethernet RJ-45 ports (WAN/LAN)
FXS Interface	Two RJ-11 Telephone port (FXS) Programmable AC impedance, Feeding voltage, Ring Voltage, Ring Cadence, Loop current and call progress tone ON-Hook Voltage: 48Vdc Ring Voltage: 50 V RMS Loop Current: Constant 23mA
Dimensions:	8.6" x 5.75" x 1.4"
Weight:	1.7 lbs (0.77kg)