Features:
Two Outdoor 12dBi Patch Antennas

Two Lightning Protectors

Two 54Mbps  Access Points

Two 20ft. Antenna Cables

Connect Two Locations 500ft. apart

Requires Line of Sight

Includes Mounting Brackets

Technical Support Included

Click Here for more Mounting Hardware

Connect your two locations up to 500ft. apart, using this easy to install wireless bridge kit.  The antennas are 12dBi gain, directional antennas.  Each antenna has 40 degrees of coverage, in one direction.

Just point the antenna in the opposite direction, connect it to the Linksys WAP54G, and you'll be connected in no time.  Linksys WAP54G's come with latest in WPA encryption, MAC address filtering and WEP encryption. 

Antennas are a 12dBi gain, directional antenna, that are non-obtrusive and easy to mount.  With these antennas, you will be able to connect any two locations together.  Share files, Internet access, video, music or any other files.  These 12dBi Antennas come with a set of mounting brackets that allow for easy tilting operation for angled installations.

If your Access Point is not in an ideal position in order to meet the 30 foot cable requirement, please take a look at our Power-over-Ethernet adapters, (POE).  This will enable you to place the Access Point in the attic, or other location that is out of reach of a AC outlet.  The PoE adapter will power the Access Point, as well as send and receive data for your network.

Lightning Arrestors:

When using outdoor antenna installations, it is always possible that an antenna will suffer damage from potential charges developing on the antenna and cable, or surges induced from nearby lightning strikes.

The 2.4GHz Lighting Protector that is Included in all of our Wireless Bridge packages will provide protection to 2.4 GHz radio equipment from static electricity and lightning-induced surges that travel on coaxial

transmission lines. This system needs to be properly grounded as  identified in the hardware installation manuals of the products.  For grounding hardware, please click here.

Note:  These antennas require Line-of-Sight to each other in order to establish a secure, reliable connection.  If you have LOS issues, then check out our NLOS (Non Line-of-Sight) packages.

 

Please Note: The wireless bridge kits listed on this page may also be referred to as 802.11 bridge  802.11 Ethernet bridge, 802.11g wireless bridge, belkin wireless bridge, d link wireless bridge , dlink wifi repeater, dlink wireless bridge, Ethernet bridge router, how to wireless bridge, internet wireless bridge, Linksys point to point wireless , Linksys wifi bridge, Linksys wifi repeater, long range wifi bridge, long range wireless Ethernet bridge, netgear network bridge, netgear wireless bridge, netgear wireless network bridge, outdoor access point bridge, outdoor Ethernet bridge, outdoor wifi bridge, outdoor wireless access point, outdoor wireless bridges, outdoor wireless Ethernet bridge, outdoor wireless point to point, point to multipoint bridge, point to point Ethernet bridge, point to point network connection, point to point router, point to point wifi bridge, point to point wireless bridging, point to point wireless connection, point to point wireless Ethernet, point to point wireless internet, point to point wireless networks, secure wireless bridge, set up wireless bridge, setting up wireless bridge, wifi bridge router, wifi client bridge, wireless access point bridge, wireless bridge access point, wireless bridge antenna, wireless bridge connection, wireless bridge kits, wireless bridge point to multipoint, wireless bridge router, wireless bridge setup, wireless bridge wds, wireless lan bridge, wireless network bridge Ethernet, wireless network bridge, wireless networking bridge, wireless repeater bridge, wireless to wireless bridge, 5GHz point to point wireless backhaul, T1 replacement wireless bridge, T1 point to point, Fiber wireless backhaul.

In StockGNS-5401Contact Us to Buy