|
Connect your two locations up to 4 miles apart, using this easy
to install wireless bridge kit. The antennas are 24dbi
gain, directional antennas. Each antenna has 15 degrees
of coverage, in one direction, and is approximately 2ft. x 4ft.
in size.
Just point the antenna in the opposite direction, connect it to
the Linksys WAP54G, and you'll be connected in no
time. WAP54G's come with latest in WPA encryption, MAC address
filtering and WEP encryption. 5 times faster then 802.11b.
Antennas are a 24dbi gain, directional antenna, that are
non-obtrusive and easy to mount. With these antennas, you will
be able to connect any two locations together. Share files,
Internet access, video, music or any other files. We will
include all necessary instructions on setting up your new 24dbi
Grid Antennas with the Wireless Bridge Kit package.
If your AP is not in an ideal position in order to meet the 30
foot cable requirement, please take a look at our
Power-over-Ethernet adapters, (POE).
Lightning Arrestors:
When using outdoor antenna installations, it
is always possible that an antenna will suffer damage from
potential charges developing on the antenna and cable, or surges
induced from nearby lightning strikes.
The 2.4GHz Lighting Protector that is
Included in all of our Wireless Bridge packages will provide
protection to 2.4 GHz radio equipment from static electricity
and lightning-induced surges that travel on coaxial
transmission lines. This system needs to be
properly grounded as identified in the hardware installation
manuals of the products. For grounding hardware, please
click here.
Note: These antennas
require Line-of-Sight to each other in order to establish a
secure, reliable connection. If you have LOS issues, then check
out our NLOS (Non
Line-of-Sight) packages.
|
Two
Outdoor 24dbi Grid Antennas
GNS-5403
