Features:
Two Outdoor 24dbi Antennas

Two 200mW Access Points

Two 5ft. Antenna Cables

Connect Two Locations 2+ miles

Requires Line of Sight

54mbps Transfer Rate

Technical Support Included

Click for Mounting Hardware

These high power Access Points

   work great for increasing signal

   signal strength between blds.

Higher Transmit Power then Linksys and Dlink!

Great for Long Distance or Partial Tree Coverage!

Connect your two locations up to 1 mile apart, using this easy to install wireless bridge kit.  The antennas are 13dbi gain, directional antennas.  Each antenna has 30 degrees of coverage, in one direction.  

Just point the antenna in the opposite direction, connect it to the indoor, high power access points, and you'll be connected in no time.  These outdoor access points come with latest in WPA encryption, MAC address filtering and WEP encryption.  5 times faster then 802.11b.  Each Access Point has the ability to transfer throughput up to 54mbps, wirelessly between your locations.  For scalability, enable AP+WDS mode, for wireless access between the locations, as well as at each location. 

Antennas are a 24dbi gain, directional antenna, that are non-obtrusive and easy to mount.  With these antennas, you will be able to connect any two locations together.  Share files, Internet access, video, music or any other files.

These access points are outdoor rated, and are meant to be placed outside, next to your antenna.  To power the access points, you use the included POE injector, which sends power + data to the Access Point using a single Ethernet cable.  This means that you can place the Access Point up to 200ft. away from your network for ease of installation.  You can also upgrade this bridge kit to use a stronger 15dbi patch antenna, or even 24dbi grid antenna, which will allow you to get better signal strength, and use a longer coax cable. Please contact us for cable lengths before ordering.  Call Now: (516) 214-0321

Lightning Arrestors:

When using outdoor antenna installations, it is always possible that an antenna will suffer damage from potential charges developing on the antenna and cable, or surges induced from nearby lightning strikes.

The 2.4GHz Lighting Protector that is recommended for all of our Wireless Bridge packages to provide protection to 2.4 GHz radio equipment from static electricity and lightning-induced surges that travel on coaxial transmission lines. This system needs to be properly grounded as  identified in the hardware installation manuals of the products.  For Lighting protection, please click here. 

Note:  These antennas require Line-of-Sight to each other in order to establish a secure, reliable connection.  If you have LOS issues, then check out our NLOS (Non Line-of-Sight) packages. 

If you have a few trees in the way, or if you want a better signal connection between your two locations, ask us to upgrade your bridge kit with a outdoor 500mW radio, or circular polarized antennas.  This will get your better range, and increased reception.

 

Receive Sensitivity: IEEE 802.11g   IEEE 802.11b 54Mbps: ≤ -72dBm 48Mbps: ≤ -73dBm 36Mbps: ≤ -77dBm 24Mbps: ≤ -81dBm 18Mbps: ≤ -84dBm 12Mbps: ≤ -86dBm 9Mbps: ≤ -88dBm 6Mbps: ≤ -89dBm 11Mbps: ≤ -88dBm 5.5Mbps: ≤ -90dBm 2Mbps: ≤ -92dBm 1Mbps: ≤ -95dBm 11Mbps: ≤ -88dBm 5.5Mbps: ≤ -90dBm 2Mbps: ≤ -92dBm 1Mbps: ≤ -95dBm Access Point Feature: Wireless Distribution System (WDS) allows APs to wirelessly connect to each other while servicing clients

 

In StockGNS-5424Contact Us to Buy