|
Commercial Grade Point-to-Point Link
Complete Link - Non Line of Sight
- 900MHz
Penetrate the
TREES!
Overview
The Motorola Canopy platform' s flexible product design allows
network operators to tailor installations to efficiently meet
the bandwidth demand of remote business and residential
subscribers. With Canopy system modules, subscribers at the edge
of the network experience secure, reliable carrier-grade
service. 900 MHz modules complement existing Canopy system
networks by providing a reliable 3.3 Mbps signaling rate to
those customers who are not able to be reached by 2.4 GHz, 5.2
GHz and 5.7 GHz networks.
Extend the Existing Network
by co-locating a 900 MHz Access Point module with an existing
2.4 GHz, 5.2 GHz or 5.7 GHz SM to act as a remote AP solution
and efficiently provide coverage to areas that are difficult to
reach due to foliage or other obstructions. This application is
the most cost effective means or reaching clusters of
subscribers in remote areas or locations with foliage because it
foes not require a tower location or backhaul equipment.
ACCESS POINT
SPECIFICATION:
|
Description |
900 MHz AP
Connectorized (External antenna) |
|
Signaling Rate |
6 Mbps maximum |
|
Typical LOS Range |
40 Miles (64 km) |
|
Typical Aggregate Useful
Throughput |
4 Mbps max |
|
Frequency range of band |
ISM 902-928 MHz |
|
Non-overlapping Channels |
3 |
|
Channel Width |
8 MHz |
|
Modulation Type |
High Index 2-level
and 4-level Frequency Shift Keying (FSK) optimized for
interference rejection |
|
Channel Spacing |
1 MHz |
|
Encryption |
DES capable |
|
Latency |
< 15 msec |
|
Carrier to Interference
ratio (C/I) |
~3dB @ 3 Mbps,
~10dB @ 6 Mbps at -70dBm |
|
Nominal Receiver
Sensitivity (dbm typical) |
-90 dBm |
|
Antenna Gain (dB) |
varies |
|
EIRP (dB) |
36 dBm |
|
Equivalent Isotropic
Radiated Power (EIRP) |
4 W |
|
DC Power (typical) |
0.3 A @ 24 VDC =
7.2 W |
|
Antenna Beam Width |
Connectorized 60
degree beam width azimuth and 35 degree elevation ~12.5
dBi |
|
Mean Time Between Failure (MTBF) |
40 yr |
|
Temperature |
-40° C to +55° C
(-40° F to +131° F) |
|
Wind Survival |
190 km/hr (118
miles/hr) |
|
Dimensions |
11.75 in H x 3.4 in
W x 3.4 in D (29.9 cm H x 8.6 cm W x 8.6 cm D) Antenna
Varies |
|
Weight |
.45 kg (1 lb),
antenna varies. |
|
Access Method |
Time Division
Duplexing/Time Division Multiple Access (TDD/TDMA) |
|
Interface |
10/100 Base T,
half/full duplex. Rate auto negotiated (802.3 compliant) |
|
Protocols Used |
IPV4, UDP, TCP,
ICMP, Telnet, HTTP, FTP, SNMP |
|
Network Management |
HTTP, TELNET, FTP,
SNMP Version 2c |
|
FCC ID |
ABZ89FC5809 |
|
Industry Canada
Certification Number |
109W-9000 |
SUBSCRIBER MODULE
SPECIFICATION:
|
Description |
900 MHz SM
Connectorized (External antenna) |
|
Market Availability |
North America,
South America, Asia |
|
Signaling Rate |
6 Mbps maximum |
|
Typical LOS Range |
40 Miles (64 km) |
|
Typical Aggregate Useful
Throughput |
4 Mbps maximum |
|
Frequency range of band |
ISM 902-928 MHz |
|
Non-overlapping Channels |
3 |
|
Channel Width |
8 MHz |
|
Modulation Type |
High Index 2-level
and 4-level Frequency Shift Keying (FSK) optimized for
interference rejection |
|
Channel Spacing |
1 MHz |
|
Encryption |
DES capable |
|
Latency |
< 15 msec |
|
Carrier to Interference
ratio (C/I) |
~3dB @ 3 Mbps,
~10dB @ 6 Mbps at -70dBm |
|
Nominal Receiver
Sensitivity (dbm typical) |
-90 dBm |
|
Antenna Gain (dB) |
varies |
|
EIRP (dB) |
36 dBm |
|
Equivalent Isotropic
Radiated Power (EIRP) |
4 W |
|
DC Power (typical) |
0.3 A @ 24 VDC =
7.2 W |
|
Antenna Beam Width |
Connectorized 60
degree beam width azimuth and 35 degree elevation ~12.5
dBi |
|
Mean Time Between Failure (MTBF) |
40 yr |
|
Temperature |
-40° C to +55° C
(-40° F to +131° F) |
|
Wind Survival |
190 km/hr (118
miles/hr) |
|
Dimensions |
11.75 in H x 3.4 in
W x 3.4 in D (29.9 cm H x 8.6 cm W x 8.6 cm D) Antenna
Varies |
|
Weight |
.45 kg (1 lb),
antenna varies. |
|
Access Method |
Time Division
Duplexing/Time Division Multiple Access (TDD/TDMA) |
|
Interface |
10/100 Base T,
half/full duplex. Rate auto negotiated (802.3 compliant) |
|
Protocols Used |
IPV4, UDP, TCP,
ICMP, Telnet, HTTP, FTP, SNMP |
|
Network Management |
HTTP, TELNET, FTP,
SNMP Version 2c |
|
FCC ID |
ABZ89FC5809 |
|
Industry Canada
Certification Number |
109W-9000 |
| Please Note:
The wireless bridge kits listed on this page may also be
referred to as 802.11 bridge 802.11 Ethernet
bridge, 802.11g wireless bridge, belkin wireless bridge,
d link wireless bridge , dlink wifi repeater, dlink
wireless bridge, Ethernet bridge router, how to wireless
bridge, internet wireless bridge, Linksys point to point
wireless , Linksys wifi bridge, Linksys wifi repeater,
long range wifi bridge, long range wireless Ethernet
bridge, netgear network bridge, netgear wireless bridge,
netgear wireless network bridge, outdoor access point
bridge, outdoor Ethernet bridge, outdoor wifi bridge,
outdoor wireless access point, outdoor wireless bridges,
outdoor wireless Ethernet bridge, outdoor wireless point
to point, point to multipoint bridge, point to point
Ethernet bridge, point to point network connection,
point to point router, point to point wifi bridge, point
to point wireless bridging, point to point wireless
connection, point to point wireless Ethernet, point to
point wireless internet, point to point wireless
networks, secure wireless bridge, set up wireless
bridge, setting up wireless bridge, wifi bridge router,
wifi client bridge, wireless access point bridge,
wireless bridge access point, wireless bridge antenna,
wireless bridge connection, wireless bridge kits,
wireless bridge point to multipoint, wireless bridge
router, wireless bridge setup, wireless bridge wds,
wireless lan bridge, wireless network bridge Ethernet,
wireless network bridge, wireless networking bridge,
wireless repeater bridge, wireless to wireless bridge,
5GHz point to point wireless backhaul, T1 replacement
wireless bridge, T1 point to point, Fiber wireless
backhaul. |
|