The 550g provides 500 mWatt of Wi-Fi transmit power, 54Mbps throughput and is compatible with any 802.11g or 802.11b client. Its high receive sensitivity up to -102dBm enables long point-to-point and client to AP applications. It comes with advanced software configurations, all housed in an industrial strength NEMA enclosure. This includes AP, point-to-point and point-to-multipoint bridging modes, supporting up to 6 WDS links, with full TCP/IP support, 802.1x, RADIUS authentication, and advanced encryption. 
 

This outdoor Access point is designed for distributed Wi-Fi deployment in hotels, apartment buildings, outdoor, or industrial applications. It is an extremely powerful Rugged Access Point, with up to 500 mWatt transmit output and industry standard Power over Ethernet. Ideal for indoor or outdoor applications where industrial hardened equipment is required, we use a NEMA style enclosure, lockable to the wall or
ceiling, UL2043 rated for use in plenums, and vibration certified for high vibration environments like vehicular mounting. The SuperAP 550g can act as an Access Point, Bridge repeater, AP Client, or combination Access Point and Bridge repeater.

 

Extended Network Range - Benefit of High RF Output

Better signal strength and throughput will result from using 500mW outdoor Access Point, with less then 5ft. coax cable to your antenna.  This will allow a bigger and better safety margin against interference, and will allow more flexibility in placement of your outdoor access point.  Reach more clients, with less equipment.

Repeater functionality
The 550g is able to operate as a repeater in addition to an access point, allowing it to communicate with other compatible AP/routers to form a Wireless Distribution System. This greatly extends the reach of the your wireless network. Using omni antennas and the unit’s powerful 500 mW radio, an extended range is possible.  This becomes useful when trees, or other obstructions prevent you from covering your specified area with a single access point.  Multiple access points can be used to create a large Wi-Fi network, making it easier and more efficient for your guests to get online.  Up to six WDS links can be established from a single unit

Technical Specifications

Wireless
• IEEE 802.11b/g
• 500 mWatt (b mode) and 100 mWatt (g mode) transmit power at N-connector
• Transmit power control
• Frequency band: 2.4-2.4835GHz
• Media Access Protocol: CSMA/CA with ACK
• Data Rates: OFDM@54Mbps, CCK@11/5.5Mbps, QPSK@2Mbps and DBSK@1Mbps
• AP Range: 2000 meters line of sight (client dependent)
• WDS Range: 20,000 meters line of sight (antenna dependent)
• 87 dBm - 81 dBm receive sensitivity b mode
• 86 dBm – 68 dBm receive sensitivity g mode

Networking
• DHCP Client and Server
• 6 WDS repeater links
• AP client mode
• 802.1d Bridging functionality
• UPnP

Security
• MAC based access control
• 64/128 bit RC4 WEP
• WPA, WPA2

Management
• Web-based management
• Antenna alignment and RSSI monitoring
• Web-based or TFTP firmware upgrade
• System logging (local or remote)
• SNMP v1/v2, MIB II with traps, 802.1x, 802.1d MIBs
• Telnet

Interfaces
• 1 10/100M Ethernet LAN port

Operating Environment
• UL 2043 Plenum rated
• NEMA and IP 68 rated for outdoor operation
• High vibration certification
• Operating Temperature: -20 to 70 C
• Storage Temperature: -20 to 70 C
• Humidity: Max. 95% non-condensing
• 10 x 6 x 2.3 In. / 3 Lbs.

Electrical
• 802.3af 48 Volt Power Over Ethernet
• AC Input: 100 – 240 VAC, 50/60 Hz, 0.35A; Output: 5V, 2.5A

Regulatory Approvals
• FCC part 15 Class B, VCCI Class B, CE Mark, UL

Advanced Firmware Features included
• 802.1x Port-based Network Access Control (EAP-MD5, EAP-TLS)
• Wireless Protected Access (WPA)
• AP load balancing
• Wireless Client Isolation
• Association Control

Warranty
• One year parts and labor