Universal Antenna Mount, Antenna Mounting hardware for WiFi, Wi Fi Antennas

Universal Antenna Mount

Provides for Easy Installation for

all Antennas


High capacity, license free, Point to Point wireless backhaul, 5GHz frequency with 23dBm integrated antennas, 20/40MHz channel spacing, 180Mbps aggregate throughput (90Mbps full duplex).

Ligowave 5GHz PTP MIMO Backhaul

High capacity, license free, Point to Point wireless backhaul, 5GHz frequency with 23dBm integrated antennas, 20/40MHz channel spacing, 220Mbps aggregate throughput (110Mbps full duplex).  65000 packets per second, gigabit Ethernet port.  Complete Link.


High capacity, license free, Point to Point wireless backhaul, 5GHz frequency with 23dBm integrated antennas, 20/40MHz channel spacing, 220Mbps aggregate throughput 110Mbps full duplex).  Complete Link.


Point to Point Wireless Bridge, Wireless Ethernet Bridge, Backhaul, Full Duplex Wireless Bridge




High capacity, license free, Point to Point wireless backhaul, 5GHz frequency with 23dBm integrated antennas, 20/40MHz channel spacing, 220Mbps aggregate throughput (110Mbps full duplex), AES, 2ms packet latency. POE/PS included.  802.3af support, with auto modulation & auto channel which allows for maximum performance, stability of the link in areas with a lot of interference.  IP67 Enclosure. Integrated spectrum analyzer.


Connectorized version available.



Commercial Grade Point-to-Point Backhaul


Complete Link - 110Mbps Full Duplex


LigoWave unleashes its highest capacity, license-free PTP device with the release of the LigoPTP PRO series product line. Making use of ground breaking 2x2 MiMo technology, the LigoPTP 5-23/5-N PRO delivers real aggregate throughput capability of up to 220 Mbps (110 Mbps full-duplex) combined with high packets-per-second performance.

Additionally, the new product is compatible with previous LigoPTP 5-23 MiMo and LigoPTP 5-N MiMo models. This product enables carrier-class point-to-point capability, ideal for dedicated access or backhaul applications (including VOIP or other small packet applications). The Ligo PTP PRO product family couples flexible channel width capability (20 or 40 MHz) and industry-leading proprietary software mechanisms to set the utmost standard in spectral efficiency.

The LigoPTP 5-23/5-N PRO products feature either an integrated dual-polarized antenna or two N-type connectors. They are housed in rugged, cast aluminum enclosures. Combining digital signal processing, dual polarization antennas and proprietary W-Jet 2 MiMo protocol these bridges have a high spectral efficiency of 7.5bit/Hz.

The LigoPTP 5-23/5-N PRO showcase an array of advanced software mechanisms that provide optimal point-to-point connectivity for high-throughput, long distance links.

LigoWave’s proprietary PTP mechanisms utilize techniques such as Dynamic Time Division Duplexing (TDD) to dynamically allocate bandwidth in the direction needed, thus increasing link efficiency and greatly decreasing the impact that distance has on throughput of the link.

The LigoWave point-to-point products also features selective repeat ARQ technology, an enhanced error-correction software mechanism that optimizes data traffic to provide very high throughput over high-bandwidth, long-range links even in the presence of interference.

The new PRO series products have an extremely powerful integrated 30 dB (1000 mW) radio which allows building solid long-distance links even with an integrated antenna. The output power on highest modulation (MCS 15) is 24 dBi which is hard to find elsewhere in the market today.

Gigabit Ethernet port and 802.3 af standard support makes the PRO series product line even more flexible. Im-provements on the SURGE and ESD protection side make this product ideal for mission critical and harsh-weather condition installations. SURGE and ESD protection was designed according to IEC 61000-4-2 (ESD) and IEC 61000-4-5 (SURGE) standards.

The LigoPTP 5-23/5-N PRO is also compatible with LigoWave’s online link calculator and WNMS, a centralized configuration, firmware, and statistics server offered by LigoWave for remote diagnostic and configuration.

Key features:

  • *5 GHz PTP bridge, ideal for:
    • Dedicated Access
    • Backhaul
    • Private networks
  • Flexible center channel and channel width capability (20/40 MHz) for throughput optimization
  • Radio rate of up to 300Mbps
  • True TCP throughput up to 180 Mbps
  • Advanced proprietary W-jet wireless protocol
  • High packet-per-second (PPS) rate is ideal for VOIP backhaul applications
  • Low packet latency (2ms)
  • Great spectral efficiency (7.5 bit/ Hz)
  • ARQ (Selective Repeat) for very high throughput
  • Dynamic TDD for allocating bandwidth in real-time to the direction needed
  • 23 dBi dual-polarization antenna
  • PoE built-in for single cable installation
  • Advanced security technologies
  • *Comprehensive management features
    • Web GUI
    • Command line management via SSH
    • WNMS server support for configuration
    • SNMP V1/2/3 with traps supporting MIBs: 802.11, 802.1x, MIBII
    • Syslog support
    • Compatible with LigoWave link calculator
    • Real-time alerts
    • Rugged articulating bracket solution for multi-facet mounting
    • Oled screen and beeper for alignment
    • IP-67 compliant

LigoWave Point to Point Wireless Bridge Installation New York City, GNS Wireless Network Installation NY, CT, PA, NJ,

Radio specifications
Wireless technology Proprietary W-Jet protocol, 2x2 MIMO
Operating mode Point-to-point
Radio frequency band 5.15 – 5.85 GHz
Channel size Configurable 20, 40 MHz
Max transmit power 2 chains x 30 dBm
Modulation schemes BPSK, QPSK, 16QAM, 64QAM
Receive sensitivity Varying between -94 and -72 dBm depending on modulation and channel size
Error correction FEC, Selective ARQ
Duplexing scheme Dynamic time division duplex
Type Integrated directional panel (LigoPTP 5-23 MIMO) or 2 N-Type connectors (LigoPTP 5-N MIMO)
Polarization Dual (LigoPTP 5-23 MIMO)
Gain V/H 23/23 dBi (LigoPTP 5-23 MIMO)
3dB Beam-width V/H 8/8 degrees (LigoPTP 5-23 MIMO)
Data Interface
Physical interface 10/100/1000 BaseT
Protocol Ethernet IEEE 802.3
Connector type RJ45
Surge protection Built-in
Link performance
Real data (TCP) throughput 220 Mbps aggregate (110 Mbps full-duplex)
Max packets per second 60,000 PPS
Packet latency 2 ms (64 bytes packet)
Recommended link distance Up to 35 km (21.7 mi)
Data encryption Hardware based AES

Dimensions (PTP 5-N MIMO)

Dimensions (PTP 5-23 MIMO)

Width 218 mm (8.5 "), height 218 mm (8.5 "), depth 70 mm (2.7 ")

Width 335 mm (13 "), height 335 mm (13 "), depth 90 mm (3.5 ")

Weight (PTP 5-N MIMO)

Weight (PTP 5-23 MIMO)

2 kg (4.4 lb) (mount included)

3.3 kg (7.3 lb) (mount included)

Power supply 9 – 48 VDC, passive PoE
Power source 100 – 240 VAC via included adapter
Power consumption 8 W
Operating temperature -40°C  ~ +80°C
Humidity 0 ~ 90 % (non-condensing)
Installation assistant OLED screen and beeper
System configuration interfaces User-friendly web GUI, SSH CLI, SNMP v1/2c/3 with traps, Centralized Remote Control Management System
Certification FCC/IC/CE
Ingress protection IP-67
Safety RoHS compliant




802.11n Dual Radio, AP-8000

Orinoco AP-8000

802.11n Dual Radio

Wi-Fi using dual 802.11n

Radios.  9422-US


Part #: GNS-AP8000

Price: $1129.99


Click for More Info.


802.11n Single Radio, AP-800

Orinoco AP-800

802.11n Single Radio

Wi-Fi using 802.11n

Radios.  9411-US


Part #: GNS-AP800

Price: $829.99


Click for More Info.


Return Policy | Terms and Conditions | FAQ | About Us | Contact Us

Copyright © GNS Wireless LLC., 2014