|
Canopy
Part Number |
BP5730BHC-2CC |
|
Description |
5.7 Ghz 60 Mbps Backhaul Module
Pair – Connectorized |
|
Signaling
Rate |
60 Mbps |
|
Typical
LOS Range |
non-LoS Up to 6 Miles
(10Km),near-LoS up to 25 Miles
(40Km),LoS Up to 124 Miles
(200Km) |
|
Typical
Aggregate Useful Throughput |
Dynamically variable modulation
ranges from 3.0 Mbps to 43 Mbps. |
|
Frequency
range of band |
5.725 GHz–5.850 GHz |
|
Channel
Width |
12 MHz |
|
Modulation
Type |
Adapting between BPSK and 64QAM
– (8 Modes). Signal is
transmitted and received with
multiple beams on separate
routes – recorrelates signals
and brings multi-path signals
into phase. Generates a new set
of Adaptive Modulation margins
which reduces the probability of
codeword errors (and hence
packet loss). TDM Mode. |
|
Encryption |
Proprietary scrambling, optional
AES 128 Bit Encryption |
|
Latency |
7ms |
|
Nominal
Receiver Sensitivity (dbm
typical) |
Adaptive, varying between -96.5
dBm and -72 dBm according to
modulation selected |
|
Antenna
Gain (dB) |
Approved to operate with flat
plate up to 28 dBi, dish up to
37.7 dBi |
|
EIRP (dB) |
Adaptive. Varying between 25 dBm
and -10 dBm according to
modulation selected and radio
path. Power Source 90-240 VAC,
50-60 Hz/36-60V DC. Power
consumption 55W maximum. |
|
Temperature |
-40° C to +160° C (-40° F to
+140° F) including solar
radiation |
|
Wind
Survival |
242 km/hr (150 miles/hr) |
|
Dimensions |
Outdoor Unit: 12W x 12H x 4.1D
inches (305 x 305 x 105 mm).
Indoor Unit: 9.85W x 1.6H x 3.1D
inches (250 x 40 x 80 mm) |
|
Weight |
Outdoor Unit: 9.1 lbs (4.1 kg)
including bracket
Indoor Unit: 1.9 lbs (864 g) |
|
Interface |
10BASE-T / 100BASE-T (RJ-45) –
auto MDI/MDIX switching |
|
Protocols
Used |
IEEE 802.3 compatible |
|
Network
Management |
Web Server and SNMP |