|
 |
|
Mfr.
Part#: |
BP5730BH20-2CC |
| GNS
Part#: |
GNS-5501 |
|
Our
Price: |
Call for Pricing |
Features:
 Near
Line-of-Sight
Clears
Obstructions 10x Better
Connect
Two Locations 30 miles apart
All
Inclusive Outdoor Enclosure
Provides
High Speed Connection
~30mbps
Throughput (aggregate)
Professional
Installation Available |
|
Commercial Grade Point-to-Point Backhaul
PTP400 Complete Link - Near Line of Sight
Motorola Canopy OFDM Backhaul Solutions
(30, 60, 150 & 300 Mbps): Enable users to achieve
greater throughput and reach further distances in Line-of-Sight
(LoS) environments and establish reliable links in challenging
near-LoS and Non-LoS conditions. Spanning distances of up to 124
miles (199 kilometers), the OFDM Backhauls are available in the
5.4 and 5.7 GHz frequency and feature:
- Dynamic frequency selection, which automatically changes
channels to avoid interference and combat link fading
without user intervention.
- Adaptive modulation to ensure maximum throughput
optimized for the radio path even as path characteristics
change.
- Built-in security protection via a complex proprietary
signal with scrambling applied.
- Multi-beam space time coding, which transmits two
redundant signals spaced in time to bring multi-path signals
into phase and resulting in less fade margins than
conventional radios
Excellent NLoS Connectivity:
In a typical urban environment, 15% of Properties 1500 feet
apart have an optical LoS path available between their roofs.
The PTP Series of Wireless Backhauls will improve the
probability of a connection to 99%using their 4-way diversity
MIMO technology. The Motorola PTP series wireless
backhauls gives 25dB lower fading losses in NLOS environments,
and has four times the nLoS range and eight times the
probability of installation than the best similar radios.
Integrated 23dB antennas can provide for up to 14 miles LOS,
connectivity without having to use external dish antennas.
The Multiple-Input Multiple-Output, (MIMO) technology will allow
the PTP series radios to communicate when there are obstacles.
Each data burst is sent with both horizontal and vertical
polarization and heard by both receivers. See diagram
below.
Main features:
| Frequency range
|
5725 GHz–5850Mhz , BP5730BH20-2CC
|
| Technology |
OFDM
|
| Radio Access Method |
TDD
|
| Modulation type |
BPSK, QPSK,QAM16, QAM64
|
| Channel bandwidth |
12MHz
|
| Payload throughput (maximum)
|
27Mbps
|
| Modulated Burst Data Rate |
45Mbps or less (depending on the distance)
|
| Receiver sensitivity (maximum)
|
-95.5dBm
|
| Device architecture |
Split-box design (ODU&IDU)
|
| Number of channels (FCC) |
DFS (up to 361 channels) or manual intervention
|
| Antenna |
23.5dBi, 8o horizontal x 8o vertical,
vertical or horizontal polarization,
(optional connector for external antenna)
|
| Range with integrated antenna
|
15 miles (max throughput with integrated antenna) up
to 40mi (low throughput)
|
| Range with external antenna
(maximum) |
58 miles, 37.6dBi dual polarity antenna
|
| Polarization |
Vertical, Horizontal
|
| Output Power |
25dBm MAX
|
| Security |
proprietary scrambling mechanism, optional AES
|
| Data
Communication |
-
|
| Standard Compliance |
IEEE 802.3 CSMA/CD
|
| VLAN support |
Yes, 802.1q
|
| VPN pass through |
YES
|
| Layer-2 Traffic Prioritization
(QoS) |
YES, 802.1p
|
| Layer-3 Traffic Prioritization
(QoS) |
IP ToS according to RFC791
|
| DHCP server option |
NO
|
| Routing, NAT option |
NO
|
| Bandwidth control |
NO
|
| GPS synchronization (self
interference avoidance) |
NO
|
|
Configuration and Management |
-
|
| Local & Remote Management |
Via Telnet, SNMP based Configuration Utility, HTTP
|
| Remote Management Access, SNMP
support |
YES
|
| Interfaces
|
-
|
| IF (intermediate frequency)
|
N/A
|
| Cable type |
CAT5
|
| IF Frequency |
N/A
|
| IF cable Impedance |
N/A
|
| Maximum: IF cable attenuation /
cable length |
330, ft
|
| Antenna connector |
Type-N female on connectorized unit
|
| Ethernet |
RG45, 10/100BaseTx
|
| Configuration Port |
N/A
|
| Auxiliary Data Port
|
N/A
|
| Alarms Port |
N/A
|
| Network Management
System |
N/A
|
| VF (Order wire
Bridge) |
N/A
|
| Order wire (for DTMF
Phone) |
N/A
|
| E1/T1 interface |
N/A
|
| Physical
Specifications |
-
|
| Power |
AC power input: 90-264VAC, 50-60 Hz,
Power consumption: 30W
|
| Environmental requirements |
ODU -40°– 60 °C, max 100% humidity (condensing),
IDU 0°– 40 °C, max 100% humidity (non-condensing)
|
|
