The Motorola PTP600 Lite, point-to-point wireless, 5.8 GHz wireless Ethernet bridge
provide more range and capacity in near- and non-line-of-sight
(NLOS) environments, delivering carrier-grade service (99.999%
availability).
|
Description |
150 Mbps 5.7 GHz BH -
Connectorized |
|
Canopy Part Number |
5830BH15C-2CC |
|
Signaling Rate |
150 Mbps |
|
Typical LOS Range |
non-LoS Up to 6 Miles
(10Km),near-LoS up to 25 Miles (40Km),LoS Up to 124
Miles (200Km) |
|
Typical Aggregate Useful Throughput |
Dynamically variable
modulation ranges from 7 Mbps to 150 Mbps |
|
Frequency range of band |
5.725 GHz–5.850 GHz (ISM) |
|
Channel Width |
30 MHz |
|
Modulation Type |
Adapting between
BPSK and 256QAM – (6 Modes). Signal is transmitted and
received with multiple beams on separate routes –
recorrelates signals and brings multi-path signals into
phase. |
|
Encryption |
Proprietary
scrambling mechanism; support of VPN |
|
Latency |
1 msec |
|
Nominal Receiver Sensitivity (dbm typical) |
Adaptive, varying
between -88 dBm and -59 dBm according to modulation
selected |
|
Antenna Gain (dB) |
Approved to operate
with flat plate up to 28 dBi, dish up to 37.7 dBi. 2 x
N-type Female |
|
EIRP
(dB) |
Varies with
modulation mode and settings from 0 dBm to 25 dBm. Power
Source 90-240 VAC, 50-60 Hz/36-60V DC. Power consumption
55W maximum. |
|
DC
Power (typical) |
55 W maximum |
|
Temperature |
-40°F (-40°C) to
+140°F (+60°C), including solar radiation |
|
Wind
Survival |
242 km/hr (150
miles/hr) |
|
Dimensions |
Outdoor Unit: 12.2W
x 12.2H x 4.1D inches (309 x 309 x 105 mm). Indoor Unit:
9.85W x 1.6H x 3.1D inches (250 x 40 x 80 mm) |
|
Weight |
Outdoor Unit: 9.1
lbs (4.1 kg) including bracket
Indoor Unit: 1.9 lbs (864 g) |
|
Interface |
10BASE-T /
100BASE-T / 1000BaseT (RJ-45) – auto MDI/MDIX Switching,
1000BaseSX option. Provides single E1/T1 ports
(G703/G704, G823/G824). |
|
Protocols Used |
IEEE 802.3
compatible |
|
Network Management |
Web Server and SNMP
using MIBII, WiMAX and private MIB |