|
Connect your two locations up to 25 miles apart, using this easy
to install Wireless Point to Point backhaul, using the reliable
Motorola Canopy 5.8ghz, 300mbps Wireless Backhaul. The antennas are
Integrated into the Motorola Canopy outdoor units. Each
Unit includes an outdoor Access Point with built in directional
antenna. Use this backhaul if you need a true throughput
of up to an estimated 150mbps between two locations that are up to
25 miles away, (conservative estimate), and are in a crowded
2.4ghz area. This
300mbps backhaul will provide low latency, with high data throughput,
Great for VoIP applications, and long range wireless backhauls.
Excellent NLoS Connectivity:
In a typical urban environment, 15% of Properties 1500 feet
apart have an optical LoS path available between their roofs.
The PTP Series of Wireless Backhauls will improve the
probability of a connection to 99%using their 4-way diversity
MIMO technology. The Motorola PTP series wireless
backhauls gives 25dB lower fading losses in NLOS environments,
and has four times the nLoS range and eight times the
probability of installation than the best similar radios.
Integrated 23dB antennas can provide for up to 14 miles LOS,
connectivity without having to use external dish antennas.
The Multiple-Input Multiple-Output, (MIMO) technology will allow
the PTP series radios to communicate when there are obstacles.
Each data burst is sent with both horizontal and vertical
polarization and heard by both receivers. See diagram
below.
Technical Details:
|
Canopy Part Number |
BP5830BH-2CC |
|
Description |
PTP 58600 Full Integrated - Link
Complete |
|
Market Availability |
North America, Europe, South
America, Asia |
|
Signaling Rate |
300 Mbps |
|
Typical LOS Range |
non-LoS Up to 6 Miles
(10Km),near-LoS up to 25 Miles
(40Km)LoS Up to 124 Miles
(200Km) |
|
Typical Aggregate Useful
Throughput |
Dynamically variable modulation
ranges from 14 Mbps to 300 Mbps |
|
Frequency range of band |
5.725 GHz - 5.850 GHz (ISM) /
300 Mbps (Over-the-Air) |
|
Channel Width |
30 MHz |
|
Modulation Type |
Adapting between BPSK and 256QAM
- (13 Modes). Signal is
transmitted and received with
multiple beams on separate
routes - recorrelates signals
and brings multi-path signals
into phase. |
|
Encryption |
Proprietary scrambling
mechanism; support of VPN |
|
Latency |
1ms |
|
Nominal Receiver Sensitivity (dbm
typical) |
Adaptive, varying between -88
dBm and -59 dBm according to
modulation selected |
|
Antenna Gain (dBi) |
System gain Varies with
modulation mode between 160 dB
and 124 dB using 23dBi
Integrated antenna |
|
DC Power (typical) |
90-240 AC / 36-60V DC, 55W max |
|
Antenna Beam Width |
Integrated flat plate / 23 dBi /
Narrow 8 degree Beam Width |
|
Mean Time Between Failure (MTBF) |
57 yrs |
|
Temperature |
-40° C to +60° C (-40° F to
+140° F) |
|
Wind Survival |
242 km/hr (150 miles/hr) |
|
Dimensions |
Outdoor Unit: 14.5W x 14.5H x
3.75D inches (370 x 370 x 95
mm). Indoor Unit: 9.85W x 1.6H x
3.1D inches (250 x 40 x 80 mm) |
|
Weight |
Outdoor Unit: 12.1 lbs (5.5 kg)
including bracket Indoor Unit:
1.9 lbs (864 g) |
|
Interface |
10BASE-T / 100BASE-T / 1000BaseT
(RJ-45) – auto MDI/MDIX
Switching, 1000BaseSX option.
Provides dual E1/T1 ports
(G703/G704, G823/G824). |
|
Protocols Used |
IEEE 802.3 compatible |
|
Network Management |
Web Server and SNMP using MIBII,
WiMAX and private MIB |
Specifications subject to change without
notice. |
|
|
Complete
Point to Point backhaul
