Quick Find:        

 

  SkyPilot SkyConnector Pro outdoor broadband wireless customer premise equipment, CPE in

  in the 5.250-6.075 GHz frequency band.

 

 

SkyPilot SkyConnector Pro outdoor broadband wireless customer premise equipment (CPE) in the 5.250-6.075 GHz frequency band

 

GNS#: GNS-SP4600
MFR #: SP-4600
Price:

$649.99

 

 

SkyGateway Features
  • Robust mesh backhaul can serve multiple applications over a common network
  • SyncMesh intelligence optimizes RF performance and available bandwidth
  • Lower OpEx through auto-provisioning, configuration, and self-healing mesh advantages
  • Adds capacity to the mesh network to meet subscriber density and traffic demands
  • DualBand and TriBand options support 2.4 GHz and 4.9 GHz client services
  • End-to-end QoS to support converged voice, data and video

 

 

 

If you are looking to provide robust broadband wireless connectivity to business subscribers, you’ll find it with the SkyConnector™ Pro. The SkyConnector Pro is customer premise equipment (CPE) that uses the unlicensed 5 GHz spectrum to provide DSL- and cable-like ‘last-mile’ broadband connectivity to permanent structures like office buildings. When combined with SkyPilot’s broadband wireless base stations, the SkyConnector Pro provides the substantial wireless link budget required to ensure maximum uptime of high-speed Internet services, even when connected over long coverage areas.

Although the SkyConnector Pro provides the industry’s best link budget, it also minimizes per-subscriber costs. The SkyConnector Pro has a surprisingly low per-unit price and features expense-reducing capabilities such as “zero-touch” configuration, which combines visual feedback of signal strength with auto-discovery and auto-provisioning features to ensure proper installation and minimize deployment and ongoing operational costs.

As a high-end business-class device, the SkyConnector Pro includes a full array of features as part of the standard package. The SkyConnector Pro comes standard with OFDM modulation and hardware-based AES encryption on all wireless links, ensuring both non-line-of-sight (NLOS) and hack-proof security. It also features SkyPilot’s unique SyncMesh™ protocol, which synchronizes all wireless communications to minimize interference, maximize spectral capacity, and ensure deterministic traffic flows to guarantee latency-sensitive applications like Voice-over-IP (VoIP). And since the SkyConnector Pro is part of SkyPilot’s Layer 2 broadband wireless backhaul network, it even has advanced traffic management capabilities such as per-subscriber rate limiting and virtual LAN (VLAN) segmentation. All of this in a compact package that can operate anywhere over the entire 5.250-6.075 GHz frequency range and has a variety of mounting options for flexible installation.

 
 

 

 

Specifications:

Wireless

Frequency band

5.250-6.075 GHz

Transmit power

32 dBm/1.6 W (peak)/26 dBm/400 mW (average)

Antenna

22 dBi (6° azimuth x 6° elevation)/vertical polarity

EIRP

54 dBm/250 W (peak)/48 dBm/63 W (average)

Receive sensitivity

-94 dBm at 6 Mbps modulation

Range

Up to 7.5 miles (12 km)

Media access

Time Division Duplex (TDD)

Modulation technique

OFDM with adaptive modulation

Modulation rates

54, 48, 36, 24, 18, 12, 9, and 6 Mbps

Throughput

Up to 13 Mbps TCP/20 Mbps UDP (at 36 Mbps modulation rate)

Latency

8-10 ms roundtrip per hop

Channel width

20 MHz

Channel resolution

5 MHz frequency control

Authentication

RSA-based certifi cates

Encryption

128-bit AES

Mechanical and Environmental

Enclosure

Outdoor UV stabilized plastic (antenna) and die-cast metal (system)

Connectors (under waterproof sliding door)

RJ-45 to 12V/1A Power over Ethernet (PoE) injector

Power

100-240 VAC, 50-60 Hz input; 6.5 Watts

Mounting

Pole mount (standard), wall mount (optional), or window suction mount (optional)

LEDs

Power, Ethernet, wireless link, and wireless signal strength

Dimensions

13” (33 cm) H x 18” (46 cm) W x 2” (5 cm) D

Weight

6.7 pounds (3.0 kg)

Operating temperature

-40° to 185° F (-40° to 85° C)

Operating humidity

5 to 95% condensing

Certifications

FCC Part 15.247, IC RS210, CE, ETSI 300-019-1.4 shock and vibration, RoHS

 

Please contact us for more information on setting up a large scale wireless hotspot.  (516) 214-0321

 

 

 
 
   

Return Policy | Terms and Conditions | FAQ | About Us | Contact Us


Copyright © GNS Wireless LLC., 2012. All Rights Reserved

All Major Cards Accepted