The 530g provides 300 mWatt of Wi-Fi transmit power, 54Mbps throughput and is compatible with any 802.11g or 802.11b client. Its high receive sensitivity up to -87dBm enables long point-to-point and client to AP applications. It comes with advanced software configurations, all housed in an industrial strength NEMA enclosure. This includes AP, point-to-point and point-to-multipoint bridging modes, supporting up to 6 WDS links, with full TCP/IP support, 802.1x, RADIUS authentication, and advanced encryption. 
 

This outdoor Access point is designed for distributed Wi-Fi deployment in hotels, apartment buildings, outdoor, or industrial applications. It is an extremely powerful Rugged Access Point, with up to 300 mWatt transmit output and industry standard Power over Ethernet. Ideal for indoor or outdoor applications where industrial hardened equipment is required, we use a NEMA style enclosure, lockable to the wall or
ceiling, UL2043 rated for use in plenums, and vibration certified for high vibration environments like vehicular mounting. The SuperAP 550g can act as an Access Point, Bridge repeater, AP Client, or combination Access Point and Bridge repeater.

 

Extended Network Range - Benefit of High RF Output 300mW

Better signal strength and throughput will result from using 300mW outdoor Access Point, with less then 5ft. coax cable to your antenna.  This will allow a bigger and better safety margin against interference, and will allow more flexibility in placement of your outdoor access point.  Reach more clients, with less equipment.  Mix and match Access Points to better suit your network environment.  1000mW, 500mW and 300mW can be configured to communicate with each other to create a seamless, more efficient wireless network.
Repeater functionality
The 530g is able to operate as a repeater in addition to an access point, allowing it to communicate with other compatible AP/routers to form a Wireless Distribution System. This greatly extends the reach of the your wireless network. Using omni antennas and the unit’s powerful 500 mW radio, an extended range is possible.  This becomes useful when trees, or other obstructions prevent you from covering your specified area with a single access point.  Multiple access points can be used to create a large Wi-Fi network, making it easier and more efficient for your guests to get online.  Up to six WDS links can be established from a single unit

Technical Specifications

 

Hardware

802.11b, 802.11g
300 mW transmit power adjustable radio
Data Rates: OFDM @ 54Mbps, CCK @ 11/5.5 Mbps
QPSK @ 2 Mbps and DBSK @ 1Mbps
87 dBm - 81 dbm receive sensitivity b mode
86 dBm - 68 dBm receive sensitivity g mode
1 10/100 ethernet LAN port
802.3af Power over Ethernet
NEMA-style enclosure with moisture proof seals
vibration certified for high vibration environments
10 x 6 x 2.3 in. / 3 lbs.

Connectivity Software

Wireless Access Point
Wireless bridging for AP to AP point to point bridging
DHCP client and server
VPN IPSec/PPTP/multicast pass-through
AP Client Mode
Long Range antenna alignment assistance

Security and Management Features

40(64) or 128 bit WEP
traffic and event logging, syslog
snmp v 1, II, 802.11
upnp
Telnet
web based management
remote firmware upgrade
windows based wireless network manager

Advanced Features

WPA(TKIP,AES)
WPA2(TKIP,AES)
802.1x port-based network access control
eap-md5
eap-tls
ap load balancing
wireless client isolation
association control
mac address based access list

Certification and Approval

CE Mark
FCC part 15 class B
VCCI Class B
UL

Warranty

One year parts and labor