The AP 550g IA-12 provides the same great features found in the SuperAP 550g combined with a 12 dBi integrated flat-panel antenna, in the same compact footprint. This design is perfect for mounting in hallways for end to end coverage of all rooms, as well as the floors above and below. The unobtrusive design appeals to public access venues like hotels and apartment buildings. The unit can also be mounted outdoors.
 

Extended Network Range - Benefit of High RF Output

Better signal strength and throughput will result from using 500mW outdoor Access Point, with less then 5ft. coax cable to your antenna.  This will allow a bigger and better safety margin against interference, and will allow more flexibility in placement of your outdoor access point.  Reach more clients, with less equipment.

Hardware

802.11b/g
39 dBi total output
500 mW transmit power adjustable radio
Data Rates: OFDM @ 54Mbps, CCK @ 11/5.5 Mbps
QPSK @ 2 Mbps and DBSK @ 1Mbps
-87 dBm ~ -81 dbm receive sensitivity b mode
-86 dBm ~ -68 dBm receive sensitivity g mode
1 10/100 ethernet LAN port
12 dBi flat panel antenna 802.3af Power over Ethernet
NEMA-style enclosure with moisture proof seals
120 degree horizontal pattern
10.5 x 6 x 6 in. / 3.2 lbs.

Connectivity Software

Wireless Access Point
Wireless bridging for AP to AP bridging
DHCP client and server
VPN IPSec/PPTP/multicast pass-through
AP Client Mode
Long Range antenna alignment assistance

Security and Management Features

40(64) or 128 bit WEP
traffic and event logging, syslog
snmp v 1, II, 802.11
upnp
Telnet
web based management
remote firmware upgrade
WPA (TKIP,AES), WPA2(TKIP, AES)
802.1x port-based network access control
eap-md5
eap-tls
wireless client isolation
mac address based access list

Advanced Features

auto channel scanning and selection
power saving mode - extends clients' battery life
ap load balancing
association control

Certification and Approval

CE Mark
FCC part 15 class B
VCCI Class B
UL

One year parts and labor