The SuperAP 580g provides 2 Watts of Wi-Fi transmit power, 54Mbps throughput and is compatible with any 802.11g or 802.11b client.  Its high receive sensitivity up to -103 dBm enables long point-to-point and client to AP applications.  It comes with advanced software configurations, all housed in an industrial strength NEMA enclosure. Pole mount kits are available.  Advanced features include AP, point-to-point and point-to-multipoint bridging modes, supporting WDS links, with full TCP/IP support, 802.1x, RADIUS authentication, and advanced encryption. 
 

Extended Network Range - Benefit of High RF Output

Better signal strength and throughput will result from using 500mW outdoor Access Point, with less then 5ft. coax cable to your antenna.  This will allow a bigger and better safety margin against interference, and will allow more flexibility in placement of your outdoor access point.  Reach more clients, with less equipment.

Repeater functionality
The 580g is able to operate as a repeater in addition to an access point, allowing it to communicate with other compatible AP/routers to form a Wireless Distribution System. This greatly extends the reach of the your wireless network. Using Omni antennas and the unit’s powerful 2000mW radio, an extended range is possible.  This becomes useful when trees, or other obstructions prevent you from covering your specified area with a single access point.  Multiple access points can be used to create a large Wi-Fi network, making it easier and more efficient for your guests to get online.  Please check with your local regulations with regards to the output power.  Transmit power is adjustable, and is up to the local installer to set correct power requirements and antenna configuration.  Contact us for more information.

 

Hardware

802.11b/g
2 Watt  transmit power adjustable radio to 200 mW
-103 dBm ~ -99 dbm receive sensitivity b mode
-96 dBm ~ -82 dBm receive sensitivity g mode
1 10/100 ethernet LAN port
Power over ethernet (poe1 or supermesh only)
NEMA-style enclosure with moisture proof seals
10.8 x 8.3 x 4 in. / 3.6 lbs

Connectivity Software

Wireless Access Point
Wireless bridging for AP to AP bridging
DHCP client and server
VPN IPSec/PPTP/multicast pass-through
AP Client Mode
Long Range antenna alignment assistance

Security and Management Features

40(64) or 128 bit WEP
traffic and event logging, syslog
snmp v 1, II, 802.11
upnp
Telnet
web based management
remote firmware upgrade
windows based wireless network manager

Advanced Features

WPA
802.1x port-based network access control
eap-md5
eap-tls
ap load balancing
wireless client isolation
association control
mac address based access list

Certification and Approval

CE Mark
FCC part 15 class B
VCCI Class B
UL

Warranty

One year parts and labor