The 700g provides 400 mWatt of Wi-Fi transmit power, 54Mbps throughput and is compatible with any 802.11g or 802.11b client. Its high receive sensitivity up to -87dBm enables long point-to-point and client to AP applications. It comes with advanced software configurations, all housed in an industrial strength NEMA enclosure. This includes AP, point-to-point and point-to-multipoint bridging modes, supporting up to 6 WDS links, with full TCP/IP support, 802.1x, RADIUS authentication, and advanced encryption. 
 

This outdoor Access point is designed for distributed Wi-Fi deployment in hotels, apartment buildings, outdoor, or industrial applications. It is an extremely powerful Rugged Access Point, with up to 400 mWatt transmit output and industry standard Power over Ethernet. Ideal for indoor or outdoor applications where industrial hardened equipment is required, we use a NEMA style enclosure, lockable to the wall or
ceiling, UL2043 rated for use in plenums, and vibration certified for high vibration environments like vehicular mounting. The SuperAP700g can act as an Access Point, Bridge repeater, AP Client, or combination Access Point and Bridge repeater.

 

Extended Network Range - Benefit of High RF Output 400mW

Better signal strength and throughput will result from using 400mW outdoor Access Point, with less then 5ft. coax cable to your antenna.  This will allow a bigger and better safety margin against interference, and will allow more flexibility in placement of your outdoor access point.  Reach more clients, with less equipment.  Mix and match Access Points to better suit your network environment.  1000mW, 500mW and 300mW can be configured to communicate with each other to create a seamless, more efficient wireless network.
Repeater functionality
The 700g is able to operate as a repeater in addition to an access point, allowing it to communicate with other compatible AP/routers to form a Wireless Distribution System. This greatly extends the reach of the your wireless network. Using omni antennas and the unit’s powerful 400 mW radio, an extended range is possible.  This becomes useful when trees, or other obstructions prevent you from covering your specified area with a single access point.  Multiple access points can be used to create a large Wi-Fi network, making it easier and more efficient for your guests to get online.  Up to six WDS links can be established from a single unit

Technical Specifications

 

Hardware

802.11b/g
400 mW transmit power adjustable radio
Data Rates: OFDM @ 54Mbps, CCK @ 11/5.5 Mbps
QPSK @ 2 Mbps and DBSK @ 1Mbps
AP Range 2000m line of sight (client dependant)
WDS Range 10,000m line of sight (antenna dependant)
-96 dBm - -92 dbm receive sensitivity b mode
-92 dBm - -76 dBm receive sensitivity g mode
1 10/100 ethernet LAN port
802.3af Power over Ethernet
NEMA-style enclosure with moisture proof seals
10 x 6 x 2.5 in / 25.5 x 15 x 6.3 cm

Networking

31 SSIDs
31 VLAN
DHCP client and server
WDS

Security and Management Features

40(64) or 128 bit WEP
traffic and event logging, syslog
snmp v 1, II, 802.11
wpa2 aes
wpa
web based management
remote firmware upgrade
ssh
QOS 802.1p Priority Tagging

Certification and Approval

CE Mark
FCC part 15 class B
VCCI Class B
UL

Warranty

One year parts and labor